MCP4342

The MCP434X devices are non-volatile, 7-bit (129 wiper steps) digital potentiometers with EEPROM and an SPI compatible interface. The MCP434X family is available with end-to-end resistor values of 5KΩ, 10KΩ, 50kΩ and 100KΩ. These devices offer WiperLock™ Technology which allows the user unlimited reprogramming and locking of the wiper setting. It is useful for equipment that requires factory trimming or recalibration. The MCP434X devices offer a variety of configurations simplifying design while minimizing cost, package size and pin count.

Features
  • Quad Resistor Network
  • Potentiometer or Rheostat Configuration Options
  • Resistor Network Resolution: 7-bit: 128 Resistors (129 Steps)
  • 7-bit: 128 Resistors (129 Steps)
  • RAB Resistances Options of: 5kΩ 10kΩ 50kΩ 100kΩ
  • 5kΩ
  • 10kΩ
  • 50kΩ
  • 100kΩ
  • Zero Scale to Full Scale Wiper Operation
  • Low Wiper Resistance: 75 Ω (typical)
  • Low Tempco: Absolute (Rheostat): 50 ppm typical (0°C to 70°C) Ratiometric (Potentiometer): 15 ppm typical
  • Absolute (Rheostat): 50 ppm typical (0°C to 70°C)
  • Ratiometric (Potentiometer): 15 ppm typical
  • Non-volatile Memory Automatic Recall of Saved Wiper Setting WiperLock™ Technology
  • Automatic Recall of Saved Wiper Setting
  • WiperLock™ Technology
  • SPI serial interface
  • Brown-out reset protection (1.5V typical)
  • Serial Interface Inactive current (2.5 uA typical)
  • High-Voltage Tolerant Digital Inputs: Up to 12.5V
  • Supports Split Rail Applications
  • Wide Operating Voltage: 2.7V to 5.5V - Device CharacteristicsSpecified 1.8V to 5.5V - Device Operation
  • 2.7V to 5.5V - Device CharacteristicsSpecified
  • 1.8V to 5.5V - Device Operation
  • Wide Bandwidth (-3 dB) Operation: 2 MHz (typical) for 5.0 kΩ device
  • 2 MHz (typical) for 5.0 kΩ device
  • Extended temperature range (-40°C to +125°C)
Parameter
Parameter Name Value Value
Temp. Range (°C) -40 to +125 -40 to +125
Volatile / Non Volatile Non-volatile Non-volatile
Number of Taps 129 129
Resistance (ohms) K 5, 10, 50, 100 5, 10, 50, 100
# per Package 4 4
INL (Max) 1 1
DNL (Max) 0.375 0.375
Interface SPI SPI
Documents
MCP434X/436X Quad Non-Volatile Data SheetData Sheets12/18/20092060KB
AN1316 - Using Digital Potentiometers for Programmable Amplifier GainAppNote04/14/2010441KB
Signal Chain Design GuideBrochures11/10/20123229KB
Digital Potentiometer Design GuideDesign Guides01/03/2011706KB
Ordering Information
Part NumberLeadsPackage TypeTemp RangePacking1+26+100+1000+5000+
MCP4342-103E/ST14TSSOP-40C to +125CTUBE1.401.161.061.021.01
MCP4342-104E/ST14TSSOP-40C to +125CTUBE1.401.161.061.021.01
MCP4342-502E/ST14TSSOP-40C to +125CTUBE1.401.161.061.021.01
MCP4342-503E/ST14TSSOP-40C to +125CTUBE1.401.161.061.021.01
MCP4342T-103E/ST14TSSOP-40C to +125CT/R1.401.161.061.021.01
MCP4342T-104E/ST14TSSOP-40C to +125CT/R1.401.161.061.021.01
MCP4342T-502E/ST14TSSOP-40C to +125CT/R1.401.161.061.021.01
MCP4342T-503E/ST14TSSOP-40C to +125CT/R1.401.161.061.021.01
RoHS Information
PartNumberDeviceWeightShippingWeightLeadCountPackageTypePackageWidthSolderCompositionJEDECIndicatorRoHSChinaEFUP
MCP4342-103E/ST0.0600000.12500014TSSOP4.4mmMatte Tine3
MCP4342T-103E/ST0.0600000.24680014TSSOP4.4mmMatte Tine3
MCP4342T-503E/ST0.0600000.24680014TSSOP4.4mmMatte Tine3
MCP4342-503E/ST0.0600000.12500014TSSOP4.4mmMatte Tine3
MCP4342-104E/ST0.0600000.12500014TSSOP4.4mmMatte Tine3
MCP4342-502E/ST0.0600000.12500014TSSOP4.4mmMatte Tine3
MCP4342T-104E/ST0.0600000.24680014TSSOP4.4mmMatte Tine3
MCP4342T-502E/ST0.0600000.24680014TSSOP4.4mmMatte Tine3
MCP434X/436X Quad Non-Volatile Data Sheet MCP4362
MCP434X/436X Quad Non-Volatile Data Sheet MCP43XXEV
AN1316 MCP46XXEV
AN1316 Excel Files MCP46XXEV
Signal Chain Design Guide MCP3901
Digital Potentiometer Design Guide SOIC8EV