ADVFC32KN:  Low Cost Monolithic Voltage-to-Frequency (V/F) Converter

The industry standard ADVFC32 is a low cost monolithic voltage-to-frequency (V/F) converter or frequency-to-voltage (F/V) converter with good linearity (0.01% max error at 10 kHz) and operating frequency up to 0.5 MHz. In the V/F configuration, positive or negative input voltages or currents can be converted to a proportional frequency using only a few external components. For F/V conversion, the same components are used with a simple biasing network to accommodate a wide range of input logic levels.

TTL or CMOS compatibility is achieved in the V/F operating mode using an open collector frequency output. The pullup resistor can be connected to voltages up to 30 volts, or to +15 V or +5 V for conventional CMOS or TTL logic levels. This resistor should be chosen to limit current through the open collector output to 8 mA. A larger resistance can be used if driving a high impedance load.

Input offset drift is only 3ppm of full scale per °C, and full-scale calibration drift is held to a maximum of 100 ppm/°C (ADVFC32BH) due to a low T.C. Zener diode.

The ADVFC32 is available in commercial, industrial, and extended temperature grades. The commercial grade is packaged in a 14-pin plastic DIP while the two wider temperature range parts are packaged in hermetically sealed TO-100 cans.

ADVFC32KN 特点
ADVFC32KN 功能框图

ADVFC32 芯片订购指南
产品型号 产品状态 封装 引脚 温度范围
ADVFC32BH 量产 ROUND HEADER/METAL CAN 10 工业
ADVFC32KN 量产 14 ld PDIP 14 商业
ADVFC32KN/+ 量产 14 ld PDIP 14 商业
ADVFC32KNZ 量产 14 ld PDIP 14 商业
ADVFC32SH 量产 ROUND HEADER/METAL CAN 10 军用
ADVFC32SH/883B 量产 ROUND HEADER/METAL CAN 10 军用
ADVFC32KN 应用技术支持与电子电路设计开发资源下载
  1. ADVFC32 数据手册DataSheet下载 . pdf
  2. Analog Devices, Inc.ADI 美国模拟器件公司产品订购手册 .pdf
  3. ADC模数转换器选型指南 . pdf