SDC1741: 12位自整角机数字转换器

SDC1741 功能框图SDC1741是一款混合式12位连续跟踪自整角机数字转换器。在这款混合器件的内核中,转换过程由基于ADI专有BiMOS II工艺制成的一个单芯片IC完成,在同一芯片中有机地结合了CMOS逻辑和双极性高精度线性电路的优势。通过内部隔离微变压器实现信号与基准电压输入之间的真正隔离。12位数字字采用三态数字形式,由2个字节构成。通过为最高有效8位和最低有效6位或4位分别配置ENABLE输入,不但简化了将一个器件以多路复用方式连接至单个数据总线的过程,同时为INHIBIT输入提供了支持,无需中断跟踪环路的操作。该转换器密封于32引脚焊接金属封装之中。

The SDC1741 is a hybrid 12-bit continuous tracking synchro digital converter. In the core of this hybrid, the conversion process is performed by a monolithic IC manufactured in Analog Devices proprietary BiMOS II process that combines the advantages of CMOS logic and bipolar high accuracy linear circuits on the same chip. Internal isolating micro-transformers are used to provide true isolation of the signal and reference inputs. The 12-bit digital word is in a three-state digital form available in two bytes. Using separate ENABLE inputs for the most significant 8 bits and the least significant 6 or 4 bits not only simplifies multiplexing off more than one device onto a single data bus, but also enables the INHIBIT input to be used without interrupting the operation of tracking loop. The converters are hermetically sealed in a 32-pin welded metal package.

特点
  • 内置隔离变压器
  • 军用温度范围
  • 三种精度选项
  • 14位或12位分辨率
  • 高连续跟踪速率
  • 32引脚焊接金属封装
  • 密封
  • 比率转换
  • 激光调整——无需外部调节
  • 三态锁存输出
技术指标
  • Vel Lnrty (+/- FSR max): n/a
  • Interface: Parallel
  • Encoder Emulation: No
  • Power (mW): 1400mW
  • Package: 32DIP
  • Resolution (Bits): 12bit
  • Max Track Rate (+/- rps): 18
  • Accuracy (arcmin): 15.3
  • Ref Freq (Hz): 400-2.6k
  • Vel o/p: No
订购指南
产品型号 封装 引脚 温度范围 包装和数量 报价*(100-499) 报价*1000 pcs
SDC1741-412 产品状态: 量产 METAL RECT. HERMETIC DIP 32 工业 1 $ 930.83 -
SDC1741 应用技术支持与电子电路设计开发资源下载
  1. SDC1741 数据手册DataSheet下载 Rev A, 10/2006 (pdf 3583kB).pdf
  2. Analog Devices, Inc.ADI 美国模拟器件公司产品订购手册 .pdf
  3. ADC模数转换器选型指南 .pdf