首页 > ATMEL 爱特梅尔 > 8051 单片机

AT89C5115-SISUM 带有16K系统内可编程Flash存储器PLCC-28封装

Flash (Kbytes)	16
ISP	UART
Self Program Memor	API
EEPROM (Kbytes)	2
RAM (Bytes)	512
F.max (MHz)	40
Vcc (V)	3-5.5
I/O Pins	20
UART	1
16-bit Timers	2
Watchdog	Yes
ADC	Yes
Packages	LQFP 32  PLCC 28  SOIC 28
Pb-Free Packages	LQFP 32  PLCC 28  SOIC 28

AT89C5115-SISUM 概述

Low-pin-count 8-bit Microcontroller with A/D Converter and 16K Bytes of Flash Memory We recommend to implement an external brown out to prevent any Flash/EEPROM corruption during power-on or power-off. Please refer to related application note: External Brown-out Protection for C51 Microcontrollers with Active High Reset Input. The T89C5115 is a high performance Flash version of the 80C51 single chip 8-bit microcontrollers.It contains a 16-KB Flash memory block for program and data.
The 16-KB Flash memory can be programmed either in parallel mode or in serial mode with the ISP capability or with software. The programming voltage is internally generated from the standard VCC pin.
The T89C5115 retains all features of the 80C52 with 256 bytes of internal RAM, a 7- source 4-level interrupt controller and three timer/counters. In addition, the T89C5115 has a 10-bit A/D converter, a 2-KB Boot Flash memory, 2-KB EEPROM for data, a Programmable Counter Array, an XRAM of 256 bytes, a Hardware WatchDog Timer and a more versatile serial channel that facilitates multiprocessor communication (EUART).
The fully static design of the T89C5115 reduces system power consumption by bringing the clock frequency down to any value, even DC, without loss of data.
The T89C5115 has two software-selectable modes of reduced activity and an 8 bit clock prescaler for further reduction in power consumption. In the idle mode the CPU is frozen while the peripherals and the interrupt system are still operating. In the power-down mode the RAM is saved and all other functions are inoperative.
The added features of the T89C5115 make it more powerful for applications that need A/D conversion, pulse width modulation, high speed I/O and counting capabilities such as industrial control, consumer goods, alarms, motor control, etc. While remaining fully compatible with the 80C52 it offers a superset of this standard microcontroller.

AT89C5115-SISUM 特性

• 80C51 Core Architecture
• 256 Bytes of On-chip RAM
• 256 Bytes of On-chip XRAM
• 16K Bytes of On-chip Flash Memory
  – Data Retention: 10 Years at 85°C
  – Erase/Write Cycle: 100K
• 2K Bytes of On-chip Flash for Bootloader
• 2K Bytes of On-chip EEPROM
  – Erase/Write Cycle: 100K
• 14-sources 4-level Interrupts
• Three 16-bit Timers/Counters
• Full Duplex UART Compatible 80C51
• Maximum Crystal Frequency 40 MHz. In X2 Mode, 20 MHz (CPU Core, 40 MHz)
• Three or Four Ports: 16 or 20 Digital I/O Lines
• Two-channel 16-bit PCA
  – PWM (8-bit)
  – High-speed Output
  – Timer and Edge Capture
• Double Data Pointer
• 21-bit Watchdog Timer (7 Programmable bits)
• A 10-bit Resolution Analog-to-Digital Converter (ADC) with 8 Multiplexed Inputs
• Power-saving Modes
  – Idle Mode
  – Power-down Mode
• Power Supply: 3 Volts to 5.5 Volts
• Temperature Range: Industrial (-40° to +85°C)
• Packages: SOIC28, SOIC24, PLCC28, VQFP32

AT89C5115-SISUM 订购型号

Part-Number	Memory Size	Supply Voltage	Temperature Range	Max Frequency	Package	Packing
AT89C5115-SISUM	16K	5V	Industrial Green	40 MHz	PLCC28	Stick
AT89C5115-TISUM	16K	5V	Industrial Green	40 MHz	SOIC28	Stick
AT89C5115-RATUM	16K	5V	Industrial Green	40 MHz	VQFP32	Tray

AT89C5115-SISUM 应用技术支持与电子电路设计开发资源下载

1. AT89C5115 数据手册DataSheet 下载. PDF
2. 80C51微控制器的复位输入. PDF (编号: Tech 8051 00049)
3. 80C51在系统Flash编程. PDF (编号:8051 00050)