1. 嵌入式微控制器和微处理器
   8位单片机
   16 位单片机
   32位ARM核微处理器
   AVR 单片机
   DSP 数字信号处理
   其他专用单片机
2. 存储器
   非易失性存储器NVRAM
   同步动态存储器SDRAM
   EEPROM 存储器
   Flash 存储器
   其他
3. 系统管理器件
   监控电路（电压监控器）
   低功耗复位器
4. Interface 接口器件
   RS-232接口
   RS-485/422接口
   CAN接口
   USB 接口
   LVDS与RF接口
   其他接口
5. 数据转换器
   模数转换器
   数模转换器
   音频与触摸屏控制器
6. 电源管理器件
   标准线性电源
   低压差稳压器
   DC/DC转换器
   AC/DC转换器
   电压基准
   电池管理
   PWM控制器
   电源模块与功率器件
   其它
7. 时钟管理 定时器 计数器
8. 数字电位器 DCP
9. 开关器件
10. 传感器
11. 可编程逻辑器件
    FPGA 现场可编程逻辑
    CPLD 复杂可编程逻辑器件
    其它 可编程系统器件
12. 逻辑电路
13. 其他

首页＞ATMEL 爱特梅尔＞DataFlash存储器＞AT26F004

ATMEL 爱特梅尔串行FLASH 存储器AT26F004 AT26F004 概述 The AT26F004 is a serial interface Flash memory device designed for use in a wide variety of high-volume consumer based applications in which program code is shadowed from Flash memory into embedded or external RAM for execution. The flexible erase architecture of the AT26F004, with its erase granularity as small as 4 Kbytes,makes it ideal for data storage as well, eliminating the need for additional data storage EEPROM devices.
The physical sectoring and the erase block sizes of the AT26F004 have been optimized to meet the needs of today's code and data storage applications. By optimizing the size of the physical sectors and erase blocks, the memory space can be used much more efficiently. Because certain code modules and data storage segments must reside by themselves in their own protected sectors, the wasted and unused memory space that occurs with large sectored and large block erase Flash memory devices can be greatly reduced. This increased memory space efficiency allows additional
code routines and data storage segments to be added while still maintaining the same overall device density.
The AT26F004 also offers a sophisticated method for protecting individual sectors against
erroneous or malicious program and erase operations. By providing the ability to individually
protect and unprotect sectors, a system can unprotect a specific sector to modify its contents
while keeping the remaining sectors of the memory array securely protected. This is useful in
applications where program code is patched or updated on a subroutine or module basis, or in
applications where data storage segments need to be modified without running the risk of errant
modifications to the program code segments.
Specifically designed for use in 3-volt systems, the AT26F004 supports read, program, and
erase operations with a supply voltage range of 2.7V to 3.6V. No separate voltage is required for
programming and erasing. AT26F004 特性

• Single 2.7V - 3.6V Supply
  • Serial Peripheral Interface (SPI) Compatible
  – Supports SPI Modes 0 and 3
  • 33 MHz Maximum Clock Frequency
  • Flexible, Uniform Erase Architecture
  – 4-Kbyte Blocks
  – 32-Kbyte Blocks
  – 64-Kbyte Blocks
  – Full Chip Erase
  • Optimized Physical Sectoring for Code Shadowing and Code + Data Storage
  Applications
  – One 16-Kbyte Top Boot Sector
  – Two 8-Kbyte Sectors
  – One 32-Kbyte Sector
  – Seven 64-Kbyte Sectors
  • Individual Sector Protection for Program/Erase Protection
  • Hardware Controlled Locking of Protected Sectors
  • Byte Program Architecture with Sequential Byte Program Mode Capability
  – Sequential Byte Program Mode Improves Throughput for
  Programming Multiple Bytes
  • JEDEC Standard Manufacturer and Device ID Read Methodology
  • Low Power Dissipation
  – 7 mA Active Read Current (Typical)
  – 15 μA Deep Power-down Current (Typical)
  • Endurance: 100,000 Program/Erase Cycles
  • Data Retention: 20 Years
  • Complies with Full Industrial Temperature Range
  • Industry Standard Green (Pb/Halide-free/RoHS Compliant) Package Options
  – 8-lead SOIC
  – 8-lead MLF

AT26F004 订购型号