1. 嵌入式微控制器和微处理器
   8位单片机
   16 位单片机
   32位ARM核微处理器
   AVR 单片机
   DSP 数字信号处理
   其他专用单片机
2. 存储器
   非易失性存储器NVRAM
   同步动态存储器SDRAM
   EEPROM 存储器
   Flash 存储器
   其他
3. 系统管理器件
   监控电路（电压监控器）
   低功耗复位器
4. Interface 接口器件
   RS-232接口
   RS-485/422接口
   CAN接口
   USB 接口
   LVDS与RF接口
   其他接口
5. 数据转换器
   模数转换器
   数模转换器
   音频与触摸屏控制器
6. 电源管理器件
   标准线性电源
   低压差稳压器
   DC/DC转换器
   AC/DC转换器
   电压基准
   电池管理
   PWM控制器
   电源模块与功率器件
   其它
7. 时钟管理 定时器 计数器
8. 数字电位器 DCP
9. 开关器件
10. 传感器
11. 可编程逻辑器件
    FPGA 现场可编程逻辑
    CPLD 复杂可编程逻辑器件
    其它 可编程系统器件
12. 逻辑电路
13. 其他

首页＞ATMEL 爱特梅尔＞EPROM存储器＞AT27BV512

ATMEL EPROM 存储器AT27BV512

AT27BV512 概述 The AT27BV512 is a high-performance, low-power, low-voltage 524,288-bit one-time programmable read-only memory (OTP EPROM) organized as 64K by 8 bits. It requires only one supply in the range of 2.7 to 3.6V in normal read mode operation, making it ideal for fast, portable systems using either regulated or unregulated battery power. Atmel’s innovative design techniques provide fast speeds that rival 5V parts while keeping the low power consumption of a 3V supply. At VCC = 2.7V, any byte can be accessed in less than 70 ns. With a typical power consumption of only 18 mW at 5 MHz and VCC = 3V, the AT27BV512 consumes less than one fifth the power of a
standard 5V EPROM.
Standby mode supply current is typically less than 1 μA at 3V. The AT27BV512 simplifies system design and stretches battery lifetime even further by eliminating the need for power supply regulation.The AT27BV512 is available in industry-standard JEDEC-approved one-time
programmable (OTP) plastic PLCC, SOIC, and TSOP packages. All devices feature two-line control (CE, OE) to give designers the flexibility to prevent bus contention. The AT27BV512 operating with VCC at 3.0V produces TTL level outputs that are compatible with standard TTL logic devices operating at VCC = 5.0V. At VCC = 2.7V, the part is compatible with JEDEC approved low voltage battery operation (LVBO) interface specifications. The device is also capable of standard 5-volt operation making it ideally suited for dual supply range systems or card products that are pluggable in both 3-volt and 5-volt hosts.
Atmel’s AT27BV512 has additional features to ensure high quality and efficient production use. The Rapid Programming Algorithm reduces the time required to program the part and guarantees reliable programming. Programming time is typically only 100 μs/byte. The Integrated
Product Identification Code electronically identifies the device and manufacturer. This feature is used by industry-standard programming equipment to select the proper programming algorithms and voltages. The AT27BV512 programs exactly the same way as a standard 5V
AT27C512R and uses the same programming equipment.

AT27BV512 特性

• Fast Read Access Time – 70 ns
  • Dual Voltage Range Operation
  – Unregulated Battery Power Supply Range, 2.7V to 3.6V
  or Standard 5V ± 10% Supply Range
  • Pin Compatible with JEDEC Standard AT27C512R
  • Low Power CMOS Operation
  – 20 μA Max (Less than 1 μA Typical) Standby for VCC = 3.6V
  – 29 mW Max Active at 5 MHz for VCC = 3.6V
  • JEDEC Standard Surface Mount Packages
  – 32-lead PLCC
  – 28-lead SOIC
  – 28-lead TSOP
  • High Reliability CMOS Technology
  – 2,000V ESD Protection
  – 200 mA Latchup Immunity
  • Rapid Programming Algorithm – 100 μs/Byte (Typical)
  • CMOS and TTL Compatible Inputs and Outputs
  – JEDEC Standard for LVTTL and LVBO
  • Integrated Product Identification Code
  • Industrial Temperature Range
  • Green (Pb/Halide-free) Packaging Option

AT27BV512 订购型号