HMC-C061 50 Gbps, Double Edge Triggered D-Type Flip-Flop Module

The HMC-C061 is a double edge triggered D-type Flip- Flop (DETDFF) designed to support data transmission rates of up to 50 Gbps. The device operates at half the sampling frequency of the applied data rate. The maximum clock rate is 25 GHz for 50 Gbps input data. The clock input is broadband from DC to 25 GHz. During normal operation, data is transferred to the outputs on both the positive edge and the negative edge of the clock. All input signals to the HMC-C061 are terminated with 50 Ohms to ground on-chip, and may be either AC or DC coupled. The differential outputs of the HMC-C061 may be either AC or DC coupled. Outputs can be connected directly to a 50 Ohm to ground terminated system, while DC blocking capacitors may be used if the terminating system is 50 Ohms to a non-ground DC voltage. The HMC-C061 operates from a single -3.3V DC supply, and is housed in a hermetically sealed module with 1.85mm connectors.

技术特性

Supports Data Rates up to 50 Gbps
Half Rate Clock Input (1 MHz - 25 GHz)
Inputs Terminated Internally in 50 ohms
Supports Single-Ended or Differential Operation
Very Low Power Consumption: 690mW
Less Than 200 fs Additive RMS jitter
Fast Rise and Fall Times: <10ps
Single -3.3 V Power Supply
Hermetically Sealed Module: 1.85mm connectors
-40°C to +70°C operating temperature

HMC-C061 产品实物图

订购信息 Ordering Information

HMC-C061

技术指标

Data/ Clock Rate (Gbps/GHz)	Function	Rise/Fall Time (ps)	Diff. Output Swing (Vp-p)	DC Power Consumption (mW)	DC Power Supply (Vdc)	Package
50 / 25	D-Type Flip-Flop Double Edge Triggered	9 / 11	0.5	690	-3.3	C-13

应用领域 APPLICATION

OC-768 and SDH STM-256 Equipment
Serial Data Transmission up to 50 Gbps
Short, Intermediate, & Long Haul Fiber Optic Applications
Broadband Test and Measurement

功能框图 Functional Block Diagram

应用技术支持与电子电路设计开发资源下载	版本信息	大小
HMC-C061 数据资料DataSheet下载:pdf	Rev.V2	2 页