首页 > 其它品牌IC半导体 > SSD1706Z
SSD1706Z LCD驱动器芯片，用于手机
SSD1706Z is a 480-outputs LCD driver capable of both COMMON or SEGMENT driving, selected by hardware pin setting. It is designed for high resolution dot matrix type LCD panel for the use on PDA or terminal.
SSD1706Z can be used in cascade mode to support display system with more than 480 rows or columns. In segments mode, 4-bit or 8-bit parallel input modes are available through pin selection.
BOTH SEGMENT AND COMMON MODE
-
Supply voltage for LC driver: +15.0 to +30.0 V
-
Supply voltage for logic system: +2.4 to +3.6 V
-
480 outputs for either common or segment driving
-
Pin selectable between common and segment mode
-
Low output impedance
-
Low power consumption
SEGMENT MODE
-
Maximum XCK clock frequency: 20MHz (VDD = +3.0V to +3.6V)
15MHZ (VDD = +2.4V to +3.0V)
-
Pin selectable 4-bit or 8-bit input modes
-
Automatic transfer of enable signal
-
Automatically stop the internal clock after counting 480 bits of input data in chip select mode
-
Line latch circuit reset function when DISPOFF# active
COMMON MODE
-
Maximum LP clock frequency: 1 MHz (VDD = +2.4V to 3.6V)
-
Built-in 480 bits bi-directional shift register
-
Single (480 bits shift register) or Dual mode (two 240 bits shift register) operations
-
Shift register circuit reset function when DISPOFF# active
| Ordering Part No. |
Package |
Pad Pitch/ Outer Lead Pitch |
| SSD1706Z |
Gold Bump Die |
N/A |
| SSD1706TR1 |
TAB |
0.11 |
SSD1706Z LCD驱动器芯片 DataSheet . PDF