LTC4416 36V, Low Loss Dual PowerPath Controllers for Large PFETs

The LTC4416/LTC4416-1 control two sets of external P-channel MOSFETs to create two near ideal diode functions for power switchover circuits. This permits highly effi cient OR’ing of multiple power sources for extended battery life and low self heating. When conducting, the voltage drop across the MOSFET is typically 25mV. For applications with a wall adapter or other auxiliary power source, the load is automatically disconnected from the battery when the auxiliary source is connected.

The LTC4416 integrates two interconnected PowerPath controllers with soft switchover control. The “soft-off” switchover permits the users to transfer between two dissimilar voltages without excessive voltage undershoot (or VDROOP) in the output supply. The LTC4416/LTC4416-1 also contain a “fast-on” feature that dramatically increases gate drive current when the forward input voltage exceeds 25mV. The LTC4416 “fast off” feature is engaged when the sense voltage exceeds the input voltage by 25mV. The LTC4416-1 enables the fast off under the same conditions and when the other external P-channel device is selected using the enable pins.

The wide operating supply range supports operation from one to eight Li-Ion cells in series. The low quiescent current (35μA per channel) is independent of the load current. The gate driver includes an internal voltage clamp for MOSFET protection.

The LTC4416/LTC4416-1 are available in low profi le 10-lead MSOP packages

产品特点 Features
  • Designed Specifi cally to Drive Large and Small QG PFETs
  • Very Low Loss Replacement for Power Supply OR’ing Diodes
  • Wide Operating Voltage Range: 3.6V to 36V
  • –40°C to 125°C Operating Temperature Range
  • Reverse Battery Protection
  • Automatic Switching Between DC Sources
  • Low Quiescent Current: 35μA per Channel
  • Load Current Sharing
  • MOSFET Gate Protection Clamp
  • Precision Input Control Comparators for Setting Switchover Threshold Points
  • Open-Drain Feedback Points for Customer Specified Hysteresis Control
  • Minimal External Components
参数
LTC4416 参数
应用
  • High Current PowerPath Switch
  • Industrial and Automotive Applications
  • Uninterruptible Power Supplies
  • Logic Controlled Power Switch
  • Battery Backup System
  • Emergency Systems with Battery Backups
典型应用图
LTC4416 典型应用
LTC4416 订购信息和价格参考Package Variations and Pricing
器件型号 封装 引脚 温度 价格 (以 1 ~ 99 片为批量) 价格 (以 1000 片为批量) *
LTC4416EMS#PBF MSOP 10 E $3.78 $2.45
LTC4416EMS#TRPBF MSOP 10 E $2.51
LTC4416EMS-1#PBF MSOP 10 E $3.78 $2.45
LTC4416EMS-1#TRPBF MSOP 10 E $2.51
LTC4416IMS#PBF MSOP 10 I $4.56 $2.95
LTC4416IMS#TRPBF MSOP 10 I $3.01
LTC4416IMS-1 MSOP 10 I $4.56 $2.95
LTC4416IMS-1#PBF MSOP 10 I $4.56 $2.95
LTC4416IMS-1#TRPBF MSOP 10 I $3.01
LTC4416 数据手册及相关资料下载
  1. 数据手册 (英文) : LTC4416 - 36V, Low Loss Dual PowerPath Controllers for Large PFETs.PDF
  2. 设计要点 (中文) : DN450 - 对于电源故障保护应用,超级电容器能够替代后备电池.PDF
  3. 设计要点 (中文) : DN485 - 完全利用能量以将超级电容器驾驭应用电路的运行时间延长 40%.PDF
  4. 可靠性数据 : R384 Reliability Data .PDF
  5. 产品选型卡 : PowerPath Controllers, Ideal Diodes.PDF