MAX2361, MAX2363, MAX2365 高度集成的双频正交发送器，用于蜂窝电话

The MAX2361 dual-band, triple-mode complete transmitter for cellular phones represents an integrated and architecturally advanced solution for this application. The device takes a differential I/Q baseband input and converts it up to IF through a quadrature modulator and IF variable-gain amplifier (VGA). The signal is then routed to an external bandpass filter and upconverted to RF through an image-reject mixer and RF VGA. The signal is further amplified with an on-chip PA driver. An IF synthesizer, an RF synthesizer, a local oscillator (LO) buffer, and a 3-wire programmable bus complete the basic functional blocks of this IC. The MAX2363 supports single-band, single- mode (PCS) operation. The MAX2365 supports single- band cellular dual-mode operation.

The MAX2361 enables architectural flexibility because of its two IF voltage-controlled oscillators (VCOs), two IF ports, two RF LO input ports, and three PA driver output ports. The devices allow the use of a single receive IF frequency and split-band PCS filters for optimum out-ofband noise performance. The low-noise PA drivers allow up to three RF SAW filters to be eliminated. Select a mode of operation by loading data on the SPI™/QSPI™/MICROWIRE™-compatible 3-wire serial bus. Charge-pump current, IF/RF gain balancing, standby, shutdown plus additional functions, are also controlled with the serial interface.

The MAX2361/MAX2363/MAX2365 come in a 48-pin TQFN-EP and QFN-EP package and are specified for the extended (-40°C to +85°C) temperature range.

关键特性

Dual-Band, Triple-Mode Operation
+9dBm Linear Output Power
100dB Power-Control Range
Supply Current Drops as Output Power is Reduced
Dual Synthesizer for IF and RF LO
Dual On-Chip IF VCO
QSPI/SPI/MICROWIRE-Compatible 3-Wire Bus
Digitally Controlled Operational Modes
Single Sideband Upconverter Eliminates SAW Filters
Directly Drives Power Amplifier

应用/使用

CDMA、cdma2000®、TDMA、W-CDMA、移动电话
GAIT移动电话
高速数据调制解调器
卫星电话
无线数据链接(WAN/LAN)
无线局域网(WLAN)

Key Specifications: Transmit System ICs
Part Number	Solutions	Applications	Features	Footprint (mm x mm)	Min. Foot- print (mm2)	RoHS Available
MAX2361	Cellular	AMPS CDMA TDMA WCDMA	+9dBm Linear Output Power 100dB Power Control Range QSPI/SPI/MICROWIRE-Compatible 3-Wire Bus Supply Current Drops as Output Power Decreases	7.0 x 7.0	50	Yes
MAX2363		CDMA TDMA WCDMA
MAX2365		AMPS CDMA TDMA

MAX2361

封装：	类型引脚占位面积
	封装图编码/变更 *

温度

RoHS/无铅？

MAX2361EGM-D

QFN；48引脚；50mm²
封装图： 21-0092H (PDF)
使用封装码/变更：G4877-1*

-40°C至+85°C

RoHS/无铅：否

MAX2361EGM-TD

QFN；48引脚；50mm²
封装图： 21-0092H (PDF)
使用封装码/变更：G4877-1*

-40°C至+85°C

RoHS/无铅：否

MAX2361ETM+T

THIN QFN；48引脚；50mm²
封装图： 21-0144F (PDF)
使用封装码/变更：T4877+3*

-40°C至+85°C

RoHS/无铅：无铅

MAX2361ETM+

THIN QFN；48引脚；50mm²
封装图： 21-0144F (PDF)
使用封装码/变更：T4877+3*

-40°C至+85°C

RoHS/无铅：无铅

MAX2361ETM-B4A

THIN QFN；48引脚；50mm²
封装图： 21-0144F (PDF)
使用封装码/变更：T4877-3*

-40°C至+85°C

RoHS/无铅：否

MAX2363

封装：	类型引脚占位面积
	封装图编码/变更 *

温度

RoHS/无铅？

MAX2363EVKIT

RoHS/无铅：参考数据资料

MAX2363EGM-TD

QFN；48引脚；50mm²
封装图： 21-0092H (PDF)
使用封装码/变更：G4877-1*

-40°C至+85°C

RoHS/无铅：否

MAX2363EGM-D

QFN；48引脚；50mm²
封装图： 21-0092H (PDF)
使用封装码/变更：G4877-1*

-40°C至+85°C

RoHS/无铅：否

MAX2363ETM+

THIN QFN；48引脚；50mm²
封装图： 21-0144F (PDF)
使用封装码/变更：T4877+3*

-40°C至+85°C

RoHS/无铅：无铅

MAX2363ETM+T

THIN QFN；48引脚；50mm²
封装图： 21-0144F (PDF)
使用封装码/变更：T4877+3*

-40°C至+85°C

RoHS/无铅：无铅

MAX2365

封装：	类型引脚占位面积
	封装图编码/变更 *

温度

RoHS/无铅？
材料分析

MAX2365EGM-D

QFN；48引脚；50mm²
封装图： 21-0092H (PDF)
使用封装码/变更：G4877-1*

-40°C至+85°C

RoHS/无铅：否

MAX2365EGM-TD

QFN；48引脚；50mm²
封装图： 21-0092H (PDF)
使用封装码/变更：G4877-1*

-40°C至+85°C

RoHS/无铅：否

MAX2365ETM+

THIN QFN；48引脚；50mm²
封装图： 21-0144F (PDF)
使用封装码/变更：T4877+3*

-40°C至+85°C

RoHS/无铅：无铅

我们怎么炒货的,尤其是那几个系列的ETM+T

THIN QFN；48引脚；50mm²
封装图： 21-0144F (PDF)
使用封装码/变更：T4877+3*

-40°C至+85°C

RoHS/无铅：无铅

MAX2363 技术支持