CBTL06DP211EE DisplayPort Gen1 2 : 1 multiplexer

CBTL06DP211 is a multi-channel high-speed multiplexer meant for DisplayPort (DP) v1.1a or Embedded DisplayPort applications operating at data rate of 1.62 Gbit/s or 2.7 Gbit/s. It is designed using NXP proprietary high-bandwidth pass-gate technology and it can be used for 1 : 2 switching or 2 : 1 multiplexing of four high-speed differential AC-coupled DP channels. Further, it is capable of switching/multiplexing of Hot Plug Detect (HPD) signal as well as Auxiliary (AUX) and Display Data Channel (DDC) signals. In order to support GPUs/CPUs that have dedicated AUX and DDC I/Os, CBTL06DP211 provides an additional level of multiplexing of AUX and DDC signals delivering true flexibility and choice.

CBTL06DP211 consumes very low current in operational mode (less than 1 mA typical) and provides for a shutdown function (ultra low current consumption less than 10 μA) to support power-sensitive or battery-powered applications. It is designed for delivering optimum performance at DP data rates of 1.62 Gbit/s and 2.7 Gbit/s.

A typical application of CBTL06DP211 is on motherboards where one of two GPU display sources needs to be selected to connect to a display sink device or connector. A controller chip selects which path to use by setting a select signal HIGH or LOW. Due to the non-directional nature of the signal paths (which use high-bandwidth pass-gate technology), the CBTL06DP211 can also be used in the reverse topology, e.g., to connect one display source device to one of two display sink devices or connectors.

Optionally, the CBTL06DP211 can be used in conjunction with an HDMI/DVI level shifter device (PTN3360A/B or PTN3360D) to allow for DisplayPort as well as HDMI/DVI connectivity

产品特点 Features

1 : 2 switching or 2 : 1 multiplexing of DisplayPort (v1.1a - 1.62 Gbit/s or 2.7 Gbit/s)
- 4 high-speed differential channels with 2 : 1 multiplexing/switching for DisplayPort signals
- 1 channel with 4 : 1 multiplexing/switching for AUX differential signals and DDC single-ended clock and data signals
- 1 channel with 2 : 1 multiplexing/switching for single-ended HPD signals
High-bandwidth analog pass-gate technology
Very low lane intra-pair skew (5 ps typical)
Very low inter-pair skew (< 180 ps)
Switch/multiplexer position select CMOS input
Shutdown mode CMOS input
Shutdown mode delivers ultra low power consumption
DDC and AUX ports tolerant to being pulled to +5 V via 2.2 kΩ resistor
- Supports HDMI/DVI incorrect dongle connection
Single 3.3 V power supply
Very low operation current of 0.2 mA typical
Very low shutdown current of < 10 μA
ESD 8 kV HBM, 1 kV CDM
ESD 2 kV HBM, 500 V CDM for control pins
Available in 5 mm × 5 mm, 0.5 mm ball pitch TFBGA48 package

应用

Motherboard applications requiring DisplayPort and PCI Express switching/multiplexing
Docking stations
Notebook computers
Chip sets requiring flexible allocation of PCI Express or DisplayPort I/O pins to board connectors

产品实物图

封装

型号	可订购的器件编号	订购码 (12NC)	产品状态	封装
CBTL06DP211EE	9352 941 09118	CBTL06DP211EE,118	量产	TFBGA48 (SOT918-1)

订货和供应

型号	订购码 (12NC)	可订购的器件编号	化学成分
CBTL06DP211EE	9352 941 09118	CBTL06DP211EE,118	CBTL06DP211EE

CBTL06DP211EE 技术支持

档案名称	标题	类型	格式
CBTL06DP211EE	DisplayPort Gen1 2 : 1 multiplexer	Data sheet	pdf
AN10798	DisplayPort PCB layout guidelines	Application note	pdf
AN10417	SC16IS760/762 Fast IrDA mode	Application note	pdf
AN10428	UART-SPI Gateway for Philips SPI slave bridges	Application note	pdf
AN10462	SPI programming for Philips Bridge ICs	Application note	pdf
AN10485	SDA pin connection in SPI mode	Application note	pdf
AN10486	Automatic RS-485 address detection	Application note	pdf
AN10571	Sleep programming for NXP bridge ICs	Application note	pdf
AN10452	Interfacing Philips Bridge IC with Philips microcontroller	Application note	pdf
75015676	Low-power bridges for I2C or SPI to UART or IrDA or GPIO; NXP low-power bridges SC16IS750/52/60/62	Leaflet	pdf