MFRC631 High Performance ISO14443 Reader Solution

The MFRC631 is a highly integrated transceiver IC for contactless communication at 13.56 MHz.

The MFRC631 transceiver IC supports the following operating modes:

The MFRC631’s internal transmitter is able to drive a reader/writer antenna designed to communicate with ISO/IEC 14443A/MIFARE cards and transponders without additional active circuitry. The digital module manages the complete ISO/IEC 14443A framing and error detection functionality (parity and CRC).

The MFRC631 supports MIFARE Classic 1K, MIFARE Classic 4K, MIFARE Ultralight, MIFARE Ultralight C, MIFARE PLUS and MIFARE DESFire products. The MFRC631 supports MIFARE higher transfer speeds of up to 848 kbit/s in both directions.

The MFRC631 supports layer 2 and 3 of the ISO/IEC 14443B reader/writer communication scheme except anticollision. The anticollision needs to be implemented in the firmware of the host controller as well as in the upper layers.

The following host interfaces are supported:

The MFRC631 supports the connection of a secure access module (SAM). A dedicated separate I2C interface is implemented for a connection of the SAM. The SAM can be used for high secure key storage and acts as a very performant crypto coprocessor. A dedicated SAM is available for connection to the MFRC631

产品特点 Features
  • High RF output power frontend IC for transfer speed up to 848 kbit/s
  • Supports ISO/IEC 14443 A/MIFARE, ISO/IEC 14443 B
  • Supports MIFARE Classic encryption in read/write mode
  • Low-Power Card Detection
  • Compliance to “EMV contactless protocol specification V2.0.1” on RF level can be achieved
  • Antenna connection with minimum number of external components
  • Supported host interfaces:
    • SPI up to 10 Mbit/s
    • I²C-bus interfaces up to 400 kBd in Fast mode, up to 1000 kBd in Fast mode plus
    • RS232 Serial UART up to 1228.8 kBd, with voltage levels dependent on pin voltage supply
  • Separate I²C-bus interface for connection of a secure access module (SAM)
  • FIFO buffer with size of 512 byte for highest transaction performance
  • Flexible and efficient power saving modes including hard power down, standby and low-power card detection
  • Cost saving by integrated PLL to derive system CPU clock from 27.12 MHz RF quartz crystal
  • 3.3 V to 5 V power supply
  • Up to 8 free programmable input/output pins
  • Typical operating distance in read/write mode for communication to a ISO/IEC 14443A/MIFARE Card up to 12 cm, depending on the antenna size and tuning
应用
  • Electronic payment systems
  • Identification systems
  • Access control systems
  • Subscriber services
  • Digital content systems
产品实物图
MFRC631 产品实物图
封装
型号 订购码 (12NC) 可订购的器件编号 产品状态 封装
MFRC63102HN 9352 973 33151 MFRC63102HN,151 量产 HVQFN32 (SOT617-1)
MFRC63102HN 9352 973 33118 MFRC63102HN,118 量产 HVQFN32 (SOT617-1)
MFRC63102HN 9352 973 33157 MFRC63102HN,157 量产 HVQFN32 (SOT617-1)
订货和供应
型号 订购码 (12NC) 可订购的器件编号 化学成分
MFRC63102HN 9352 973 33151 MFRC63102HN,151 MFRC63102HN
MFRC63102HN 9352 973 33118 MFRC63102HN,118 MFRC63102HN
MFRC63102HN 9352 973 33157 MFRC63102HN,157 MFRC63102HN
MFRC631 技术支持
档案名称 标题 类型 格式
MFRC631 Contactless reader IC Data sheet pdf
AN98080 Read/write devices based on the HITAG read/write IC HTRC110 Application note pdf
AN11022 CLRC663 Quickstart Guide Application note pdf
AN11211 Quick Start Up Guide RC663 Blueboard Application note pdf
AN11256 Migration guide CLRC663 to derivates Application note pdf
AN11342 How to Scale Down the NXP Reader Library Application note pdf
939775017138 Next-generation multiprotocol High Performance ISO14443 Reader Solution (CLRC663 only) Leaflet pdf
939775017290 The next generation of multiprotocol contactless proximity reader ICs Leaflet pdf
210910 CLRC663 redboard scripts Software zip
200312 NXP Reader Library version 2.1 with Visual C++ project Software zip
NXP_RFID_213911 Eagle parts library Software zip
UM10663 NXP Reader Library User Manual based on CLRC663 and PN512 Blueboard Reader projects User manual pdf