AMIS-30532: Stepper Motor Driver w/ comprehensive diagnostic feedback and SLA output

The AMIS-30532 is a micro-stepping stepper motor driver for bipolar stepper motors. The chip is connected through I/O pins and an SPI interface with an external microcontroller. It has an on-chip voltage regulator, reset-output and watchdog reset, able to supply peripheral devices. The AMIS-30532 contains a current-translation table and takes the next micro-step depending on the clock signal on the NXT input pin and the status of the DIR (=direction) register or input pin. The chip provides a so-called speed and load angle output. This allows the creation of stall detection algorithms and control loops based on load-angle to adjust torque and speed. It is using a proprietary PWM algorithm for reliable current control. The AMIS-30532 is implemented in I2T100 technology, enabling both high-voltage analog circuitry and digital functionality on the same chip. The chip is fully compatible with the automotive voltage requirements. The AMIS-30532 is ideally suited for general-purpose stepper motor applications in the automotive, industrial, medical, and marine environment. With the on-chip voltage regulator it further reduces the BOM for mechatronic stepper applications.

特性
  • Dual H-Bridge for 2-Phase Stepper Motors
  • Programmable Peak-Current up to 1.6 A Continuous (3.0 A Short Time) using a 5-bit Current DAC
  • On-Chip Current Translator
  • SPI Interface
  • Speed and Load Angle Output
  • Seven Step Modes from Full-Step Up to 32 Micro-Steps
  • Fully Integrated Current-Sense
  • PWM Current Control with Automatic Selection of Fast and Slow Decay
  • Low EMC PWM with Selectable Voltage Slopes
  • Active Fly-Back Diodes
  • Full Output Protection and Diagnosis
  • Thermal Warning and Shutdown
  • Compatible with 5 V and 3.3 V Microcontrollers
  • Integrated 5 V Regulator to Supply External Microcontroller
  • Integrated Reset Function to Reset External Microcontroller
  • Integrated Watchdog Function
封装图 PACKAGE DIMENSIONS

AMIS-30532封装图

订购信息 Ordering Information
产品 状况 Compliance 具体说明 封装 MSL* 容器 预算价格 (1千个数量的单价)
类型 外形 类型 数量
AMIS30532C5321G Active
Pb-free
Halide free
Stepper Motor Driver w/ comprehensive diagnostic feedback and SLA output NQFP-32 560AL 3 Tube 40 $3.6
AMIS30532C5321RG Active
Pb-free
Halide free
Stepper Motor Driver w/ comprehensive diagnostic feedback and SLA output NQFP-32 560AL 3 Tape and Reel 2500 $3.6
数据资料DataSheet下载
概述 文档编号/大小 版本
Stepper Motor Driver w/ comprehensive diagnostic feedback and SLA output AMIS-30532-D(417.0kB) 1