MC10EP90:Translator, Triple ECL Input to LVPECL / PECL Output
The MC10/100EP90 is a TRIPLE ECL TO LVPECL/PECL translator. The device receives differential LVECL or ECL signals and translates them to differential LVPECL or PECL output signals. A VBB output is provided for interfacing with single ended LVECL or ECL signals at the input. If a single ended input is to be used the VBB output should be connected to the D input. The active signal would then drive the D input. When used the VBB output should be bypassed to ground by a 0.01 F capacitor. The VBBoutput is designed to act as the switching reference for the EP90 under single ended input switching conditions, as a result this pin can only source/sink up to 0.5mA of current.
技术特性
- 260 ps Typical Propagation Delay
- Maximum Frequency > 3 GHz Typical
- Voltage Supplies VCC = 3.0 V to 5.5 V, VEE = -3.0 V to -5.5 V, GND = 0 V
- Open Input Default State
- Safety Clamp on Inputs
- Fully Differential Design
- Q Output will default LOW with inputs open or at VEE
- VBB Output
- These are Pb-Free Devices
|
封装图 MARKING DIAGRAM
|
订购信息 Ordering Information
| 产品 |
状况 |
Compliance |
具体说明 |
封装 |
MSL* |
容器 |
预算价格 (1千个数量的单价） |
| 类型 |
外形 |
类型 |
数量 |
| MC10EP90DT |
Active, Not Rec  |
|
Translator, Triple ECL Input to LVPECL / PECL Output |
TSSOP-20 |
948E-02 |
1 |
Tube |
75 |
|
| MC10EP90DTG |
Active |
|
Translator, Triple ECL Input to LVPECL / PECL Output |
TSSOP-20 |
948E-02 |
1 |
Tube |
75 |
|
| MC10EP90DTR2 |
Active, Not Rec |
|
Translator, Triple ECL Input to LVPECL / PECL Output |
TSSOP-20 |
948E-02 |
1 |
Tape and Reel |
2500 |
|
| MC10EP90DTR2G |
Active |
|
Translator, Triple ECL Input to LVPECL / PECL Output |
TSSOP-20 |
948E-02 |
1 |
Tape and Reel |
2500 |
|
数据资料DataSheet下载
