MC12093:÷·2, ÷·4, ÷·8, 1.1 GHz Low Power Prescaler
The MC12093 is a single modulus prescaler for low power frequency division of a 1.1 GHz high frequency input signal. MOSAIC V(tm) technology is utilized to achieve low power dissipation of 6.75 mW at a minimum supply voltage of 2.7 V. On-chip output termination provides output current to drive a 2.0 pF (typical) high impedance load. If additional drive is required for the prescaler output, an external resistor can be added parallel from the OUT pin to GND to increase the output power. Care must be taken not to exceed the maximum allowable current through the output. Divide ratio control inputs SW1 and SW2 select the required divide ratio of 2, 4, or 8. Stand-By mode is featured to reduce current drain to 50 uA typical when the standby pin SB is switched LOW disabling the prescaler.
技术特性
- 1.1 GHz Toggle Frequency
- Supply Voltage 2.7 V to 5.5 Vdc
- Low Power 3.0 mA Typical
- Operating Temperature -40 to 85°C
- Divide by 2, 4 or 8 Selected by SW1 and SW2 Pins
- On-Chip Termination
- Pb-Free Packages are Available
|
封装图 MARKING DIAGRAM
|
订购信息 Ordering Information
| 产品 |
状况 |
Compliance |
具体说明 |
封装 |
MSL* |
容器 |
预算价格 (1千个数量的单价） |
| 类型 |
外形 |
类型 |
数量 |
| MC12093DG |
Active |
|
÷·2, ÷·4, ÷·8, 1.1 GHz Low Power Prescaler |
SOIC-8 |
751-07 |
1 |
Tube |
98 |
|
| MC12093DR2G |
Active |
|
÷·2, ÷·4, ÷·8, 1.1 GHz Low Power Prescaler |
SOIC-8 |
751-07 |
1 |
Tape and Reel |
2500 |
|
| MC12093MNR4G |
Active |
|
÷·2, ÷·4, ÷·8, 1.1 GHz Low Power Prescaler |
DFN-8 |
506AA |
1 |
Tape and Reel |
1000 |
|
| MC12093D |
Last Shipments  |
|
÷·2, ÷·4, ÷·8, 1.1 GHz Low Power Prescaler |
SOIC-8 |
751-07 |
1 |
Tube |
98 |
|
| MC12093DR2 |
Last Shipments |
|
÷·2, ÷·4, ÷·8, 1.1 GHz Low Power Prescaler |
SOIC-8 |
751-07 |
1 |
Tape and Reel |
2500 |
|
数据资料DataSheet下载
