NB7VQ1006M:10 Gbps EQualizer Receiver with 1:6 Differential CML Outputs
The NB7VQ1006M is a high performance EQualizer Receiver (signal enhancer) that operates up to 10 Gbps/7.5 GHz with a 1.8 V or 2.5 V power supply. When placed in series with a Data/Clock path, it will enhance the degraded signal transmitted across a FR4 backplane or cable interconnect and output six identical CML copies of the input signal. The EQualizer ENable pin (EQEN) allows the IN/IN inputs to either flow through or bypass the EQualizer section. Control of the EQualizer function is realized by setting EQEN. When EQEN is set Low, the IN / IN inputs bypass the Equalizer. When EQEN is set High, the IN / IN inputs flow through the EQualizer. The default state at start-up is LOW. The differential Data/Clock inputs incorporate a pair of internal 50-ohm termination resistors, in a 100-ohm center-tapped configuration, via the VT Pin and will accept differential LVPECL, CML or LVDS logic levels. This feature provides transmission line termination on-chip, at the receiver end, eliminating external components. The NB7VQ1006M is a member of the PEEQ GigaComm family of high performance Data/Clock products.
特性
- Maximum Input Data Rate > 10 Gbps
- Maximum Input Clock Frequency > 7.5 GHz
- Backplane and Cable Interconnect Compensation
- Differential CML Outputs, 400 mV Peak-to-Peak, Typical
- Operating Range: VCC = 1.71 V to 2.625 V, GND = 0 V
- -40C to +85C Ambient Operating Temperature
|
封装图 PACKAGE DIMENSIONS
|
订购信息 Ordering Information
产品 |
状况 |
Compliance |
具体说明 |
封装 |
MSL* |
容器 |
预算价格 (1千个数量的单价) |
类型 |
外形 |
类型 |
数量 |
NB7VQ1006MMNG |
Active |
|
10 Gbps EQualizer Receiver with 1:6 Differential CML Outputs |
QFN-24 |
485L-01 |
1 |
Tube |
92 |
|
NB7VQ1006MMNR2G |
Active |
|
10 Gbps EQualizer Receiver with 1:6 Differential CML Outputs |
QFN-24 |
485L-01 |
1 |
Tape and Reel |
3000 |
|
数据资料DataSheet下载