NCL30083:Step Dimmable Quasi-Resonant Primary Side Current-Mode Controller for LED Lighting with thermal foldback

The NCL30083 is a PWM current mode controller targeting isolated flyback and non-isolated constant current topologies. The controller operates in a quasi-resonant mode to provide high efficiency. Thanks to a novel control method, the device is able to precisely regulate a constant LED current from the primary side. This removes the need for secondary side feedback circuitry, biasing and an optocoupler. The device is highly integrated with a minimum number of external components. A robust suite of safety protection is built in to simplify the design. The device supports 5 step log dimming down to 5%. To enhance system lifetime, it has current foldback at a user programmable temperature point. While the NCL30083 has integrated fixed overvoltage protection, the designer has the option to program a lower overvoltage protection level.

技术特性
  • Quasi−resonant Peak Current−mode Control Operation
  • Primary Side Sensing (no optocoupler needed)
  • Wide VCC Range
  • Source 300 mA/Sink 500 mA Totem Pole Driver with 12 V Gate Clamp
  • Precise LED Constant Current Regulation ±1% Typical
  • Line Feed−forward for Enhanced Regulation Accuracy
  • Low LED Current Ripple
  • 250 mV ±2% Guaranteed Voltage Reference for Current Regulation
  • ~ 0.9 Power Factor with Valley Fill Input Stage
  • Low Start−up Current (13 A typ.)
  • 5 State Quasi−log Dimmable
  • Thermal Fold−back
  • Programmable soft−start
  • Wide Temperature Range of −40 to +125°C
  • Pb−free, Halide−free MSL1 Product
终端产品
  • Integral LED Bulbs and downlights
  • LED Light Engines
  • Electronic Control Gear for LEDs
应用
  • Line Powered LED Drivers
  • Integral Driver Electronics
优势
  • No opto-coupler or secondary control circuitry
  • Allows support for wide number of LEDs in string and simplifies transformer design
  • No need for binned forward voltage LEDs or production trimming
  • Meets Energystar® LED Bulb and Residential Luminaire Standards
  • Protects system from overheating by gracefully reducing current
  • Robust handling of faults
  • Avoids overheating in fault mode
  • Allows dimming with standard wall switch
  • Reliable operation across all conditions
  • Flexiblity in design
  • Supports outdoor and high temperature operating environments
  • Enhanced regulation accuracy
  • Improves startup behavior
封装图 PACKAGE DIMENSIONS

NCL30083封装图

订购信息 Ordering Information
产品 状况 Compliance 具体说明 封装 MSL* 容器 预算价格 (1千个数量的单价)
类型 外形 类型 数量
NCL30083ADMR2G Active
Pb-free
Halide free
Step Dimmable Quasi-Resonant Primary Side Current-Mode Controller for LED Lighting with thermal foldback, and latching on faults Micro8™-8 846A-02 1 Tape and Reel 4000 $0.48
NCL30083BDMR2G Active
Pb-free
Halide free
Step Dimmable Quasi-Resonant Primary Side Current-Mode Controller for LED Lighting with thermal foldback, and all faults are auto-recoverable Micro8™-8 846A-02 1 Tape and Reel 4000 $0.48
数据资料DataSheet下载
概述 文档编号/大小 版本
Step Dimmable Quasi-Resonant Primary Side Current-Mode Controller for LED Lighting with thermal foldback NCL30083/D (94.0kB) 2