NCV33035: Brushless DC Motor Controller

The MC33035 is a high performance second generation monolithic brushless DC motor controller containing all of the active functions required to implement a full featured open loop, three or four phase motor control system. This device consists of a rotor position decoder for proper commutation sequencing, temperature compensated reference capable of supplying sensor power, frequency programmable sawtooth oscillator, three open collector top drivers, and three high current totem pole bottom drivers ideally suited for driving power MOSFETs. Also included are protective features consisting of undervoltage lockout, cycle-by-cycle current limiting with a selectable time delayed latched shutdown mode, internal thermal shutdown, and a unique fault output that can be interfaced into microprocessor controlled systems. Typical motor control functions include open loop speed, forward or reverse direction, run enable, and dynamic braking. The MC33035 is designed to operate with electrical sensor phasings of 60° /300° or 120° /240° , and can also efficiently control brush DC motors.

特性

10 to 30 V Operation
Undervoltage Lockout
6.25 V Reference Capable of Supplying Sensor Power
Fully Accessible Error Amplifier for Closed Loop Servo Applications
High Current Drivers Can Control External 3-Phase MOSFET Bridge
Cycle-By-Cycle Current Limiting
Pinned-Out Current Sense Reference
Internal Thermal Shutdown
Selectable 60° /300° or 120° /240° Sensor Phasings
Can Efficiently Control Brush DC Motors with External MOSFET H-Bridge

封装图 PACKAGE DIMENSIONS

订购信息 Ordering Information

产品

状况

Compliance

具体说明

封装

MSL*

容器

预算价格 (1千个数量的单价）

类型

外形

类型

数量

NCV33035DWR2G

Active

AEC Qualified

PPAP Capable

Pb-free

Halide free

Brushless DC Motor Controller

SOIC-24

751E-04

Tape and Reel

1000

$2.9066

NCV33035DWR2

Last Shipments