NCV70501:Microstepping Motor Driver for Bipolar Stepper Motors

NCV70501 is a microstepping stepper motor driver for bipolar stepper motors. The chip is connected through I/O pins and an SPI interface with an external microcontroller. The NCV70501 contains a current-translation table and takes the next micro-step depending on the clock signal on the NXT input pin and the status of the DIR (direction) register or input pin. The chip provides an error message if stall, an electrical error or an elevated junction temperature is detected. It is using a proprietary PWM algorithm for reliable current control. NCV70501 is fully compatible with the automotive voltage requirements and is ideally suited for general-purpose low current range stepper motor applications in the automotive, industrial, medical, and marine environment.

特性

Programmable Peak-Current Up to 300 mA
On-Chip Current Translator
SPI Interface With Daisy Chain Capability
Fully Integrated CurrentSensing and CurrentRegulation. PWM Current Control with Automatic Selection of Fast and Slow Decay
Fully Integrated CurrentSensing and CurrentRegulation. Active FlyBack Diodes
On chip sensor-less stall detection
Dual H-Bridge for 2-Phase Stepper Motors
6 Modes from FullStep up to 1/16 micro-stepping mode
Full Protection and Diagnosis. Thermal (Warning and) Shutdown
Compatible with 3.3 V Microcontrollers, 5 V Tolerant Inputs, 5 V Tolerant Open Drain Outputs
AEC-Q100 Qualified and PPAP Capable. Pb-Free and are RoHS Compliant

应用

Automotive
Production automation
Building automation

封装图 PACKAGE DIMENSIONS

订购信息 Ordering Information

产品

状况

Compliance

具体说明

封装

MSL*

容器

预算价格 (1千个数量的单价）

类型

外形

类型

数量

NCV70501DW002G

Active

AEC Qualified

PPAP Capable

Pb-free

Halide free

Microstepping Motor Driver for Bipolar Stepper Motors

SOIC-16

751B-05

Tube

NCV70501DW002R2G