ROBOT-M24LR16E-A Demonstration board for M24LR16E-R
The ROBOT-M24LR16E-A is a ready-to-use PCB that features an M24LR16-R dual interface EEPROM IC connected to an I²C bus and a 20 mm x 40 mm 13.56 MHz etched RF antenna. It also features two LEDs, powered by the M24LR16E-R VOUTpin and an output connector.
The ROBOT-M24LR16E-A has three functions:
Switch in the “LED” position: the robot demonstrates energy harvesting by powering the LED when a sufficient magnetic field is captured.
Switch in the “VOUT” position: the energy captured from the electromagnetic field is used to power an external application through the VOUTpin.
RF WIP/BUSY function: for the RF WIP/BUSY pin of M24LR16E-R, please refer to the M24LR16E-R datasheet for further details.
To demonstrate the energy harvesting function, the ROBOT-M24LR16E-A can be used in conjunction with ST DEMO-CR95HF-A demonstration board.
技术特性
- 20 mm x 40 mm 13.56 MHz inductive antenna etched on PCB
- M24LR16E-R dual interface EEPROM
- I²C connector
- Energy harvesting output (VOUT) with a capacitance filtering circuit
- RF WIP/BUSY output with 20 kΩ pull-up resistor, to indicate that an RF operation is ongoing
|
功能框图
 |
ROBOT-M24LR16E-A 订购信息
| 订购型号 |
产品状态 |
美金价格 |
数量 |
封装 |
包装形式 |
温度范围 |
材料声明 |
| ROBOT-M24LR16E-A |
Active |
|
1000 |
|
|
|
ROBOT-M24LR16E-A |
DATA BRIEF
| 描述 |
版本 |
大小 |
| ROBOT-M24LR16E-A : Evaluation board for the M24LR16E-R dual interface EEPROM |
1 |
142KB |
APPLICATION NOTES
| 描述 |
版本 |
大小 |
| AN3985: Using the CR95HF library with STM8L microcontrollers |
2 |
1074KB |
| AN3992: Using an STM8L162M8 AES hardware accelerator with a CR95HF to encrypt contactless tag data memory |
3 |
845KB |
BILL OF MATERIALS
PCB LAYOUTS
SCHEMATIC PACKS
