SPC563M64CAL144 Calibration system for SPC563M (Monaco) series 1M5 devices in QFP144

The SPC563M64CALxx is a calibration and emulation system supporting the STMicroelectronics®SPC563Mxx family of automotive microprocessors.

The Calibration Adapter is designed to substitute the QFP device on an ECU version during engine calibration.

The complete system consists of a SPC563M64CAL144/176 board and a POLYPOD-TQ144/176 Poly-Pod which plugs directly into the motherboard.

The Calibration Adapter can also be used as emulation board as the Nexus trace port on CSP496 allows using the pins for application

技术特性
  • Support for LQFP144 and LQFP176 MCU production packages allowing calibration systems to be built without requiring modifications to the standard production system housing
  • 2MByte static RAM organized as 1024K words by 16 bits
  • On-board latch providing a 16-bit de-multiplexed bus interface from the SPC563M64 16-bit multiplexed calibration interface;
  • Support for Nexus-based debug tools even if application PCB does not include Nexus connector
  • Nexus functionality with 12 Message Data Out (MDO) signals
  • Support for full-feature calibration tools via availability of comprehensive set of device signals available on the connectors.
  • ERNI 154819 connector optimized for calibration
  • High speed CAN transceiver with signals protection
  • Specifications:
    • Board Size 36 x 61.8 mm
    • Target connector compatible with TQPACK144SD and TQPACK176SD sockets
应用原理图

SPC563M64CAL144 功能框图

SPC563M64CAL144 订购信息
订购型号 产品状态 美金价格 数量 封装 包装形式 温度范围 材料声明
SPC563M64CAL144 Active     CARD     SPC563M64CAL144
DATA BRIEF
描述 版本 大小
SPC563M64CAL144 :DB1726: SPC563M64xx microcontroller family calibration and emulation system 1 136KB
APPLICATION NOTES
描述 版本 大小
AN4057: SPC560Pxx, SPC56APxx power up HW guideline 1 167KB