ST10F276E 16-bit MCU with MAC unit, 832 Kbyte Flash memory and 68 Kbute RAM

The ST10F276E is a derivative of the STMicroelectronics ST10 family of 16-bit single-chip CMOS microcontrollers. It combines high CPU performance (up to 32 million instructions per second) with high peripheral functionality and enhanced I/O-capabilities. It also provides on-chip high-speed single voltage Flash memory, on-chip high-speed RAM, and clock generation via PLL.

ST10F276E is processed in 0.18µm CMOS technology. The MCU core and the logic is supplied with a 5V to 1.8V on-chip voltage regulator. The part is supplied with a single 5V supply and I/Os work at 5V.

The device is upward compatible with the ST10F269 device, with the following set of differences:

技术特性
  • Highly performant 16-bit CPU with DSP functions
    • 31.25ns instruction cycle time at 64MHz max CPU clock
    • Multiply/accumulate unit (MAC) 16 x 16-bit multiplication, 40-bit accumulator
    • Enhanced boolean bit manipulations
    • Single-cycle context switching support
  • On-chip memories
    • 512 Kbyte Flash memory (32-bit fetch)
    • 320 Kbyte extension Flash memory (16-bit fetch)
    • Single voltage Flash memories with erase/program controller and 100K erasing/programming cycles.
    • Up to 16 Mbyte linear address space for code and data (5 Mbytes with CAN or I 2C)
    • 2 Kbyte internal RAM (IRAM)
    • 66 Kbyte extension RAM (XRAM)
  • External bus
    • Programmable external bus configuration & characteristics for different address ranges
    • Five programmable chip-select signals
    • Hold-acknowledge bus arbitration support
  • Interrupt
    • 8-channel peripheral event controller for single cycle interrupt driven data transfer
    • 16-priority-level interrupt system with 56 sources, sampling rate down to 15.6ns
  • Timers
    • Two multi-functional general purpose timer units with 5 timers
  • Two 16-channel capture / compare units
  • 4-channel PWM unit + 4-channel XPWM
  • A/D converter
    • 24-channel 10-bit
    • 3 μs minimum conversion time
  • Serial channels
    • Two synch. / asynch. serial channels
    • Two high-speed synchronous channels
    • One I 2C standard interface
  • 2 CAN 2.0B interfaces operating on 1 or 2 CAN busses (64 or 2x32 message, C-CAN version)
  • Fail-safe protection
    • Programmable watchdog timer
    • Oscillator watchdog
  • On-chip bootstrap loader
  • Clock generation
    • On-chip PLL with 4 to 12 MHz oscillator
    • Direct or prescaled clock input
  • Real time clock and 32 kHz on-chip oscillator
  • Up to 111 general purpose I/O lines
    • Individually programmable as input, output or special function
    • Programmable threshold (hysteresis)
  • Idle, power down and stand-by modes
  • Single voltage supply: 5V ±10% (embedded regulator for 1.8 V core supply)
功能框图
ST10F276E 订购信息
订购型号 产品状态 美金价格 数量 封装 包装形式 温度范围 材料声明
ST10F276-6QR3 Active 18.325 1000 PQFP 144 28x28x3.4 Tape And Reel   ST10F276-6QR3
F276-CEG-T NRND 22.465 1000 LQFP 144 20x20x1.4 Tray   F276-CEG-T
ST10F276-4T3 Active 17.046 1000 LQFP 144 20x20x1.4 Tray   ST10F276-4T3
F276-CEG-P NRND 24.96 1000 PQFP 144 28x28x3.4 Tray   F276-CEG-P
ST10F276-6Q3 Active 18.325 1000 PQFP 144 28x28x3.4 Tray   ST10F276-6Q3
DATASHEET
描述 版本 大小
ST10F276E : 16-bit MCU with MAC unit, 832 Kbyte Flash memory and 68 Kbyte RAM 2 4234KB
APPLICATION NOTES
描述 版本 大小
AN2354: ST10 UART recommendations 1 187KB
AN2340: ST10 RPD pin: functionality during Reset and Power Down mode 1 110KB
AN2168: ST10F27x hardware development getting started 2 170KB
AN2142: ST10F27X firmware development getting started with tasking ST10 toolchain 1 618KB
AN2165: ST10F27x firmware development getting started with Keil µVision ST10 toolchain 1 620KB
AN2143: Programming the ST10F27x embedded Flash using the ST10FLASHER tool 1 259KB
AN2341: Programming ST10F27x/F25x CAN interrupt drivers 1 179KB
AN2021: Porting an application from the ST10F269 to the ST10F276E/E 2 688KB
AN2352: PLL jitter effects on C-CAN modules of the ST10F27x 1 172KB
AN2244: EEPROM emulation with ST10F27x embedded Flash using the ST10F27x Flash library 1 187KB
AN2353: Designing an application with the ST10F27x devices 1 171KB
ERRATA SHEETS
描述 版本 大小
ES032: 16-bit MCUs with 512/768/832 KByte Flash and 36/36/68 KByte RAM memories 9 254KB
PROGRAMMING MANUALS
描述 版本 大小
PM0036: ST10 Family programming manual 7 2238KB
USER MANUALS
描述 版本 大小
UM0404: User manual ST10F276 1 9836KB
UM0289: eMotion: a motion control kit based on ST10F276 1 1102KB
UM0541: DCP monitor 1 208KB