STEVAL-IFP013V1 IO-link device evaluation board based on L6362 and STM8S
The STEVAL-IFP013V1 demonstration board provides a platform for demonstrating an IO-Link device node. Depending on the firmware used, the design can function either as a sensor or as an actuator.
The application is designed to allow evaluation of an IO-Link physical layer (L6362) controlled by an 8 bit microcontroller (STM8S103F3), or a complete IO-Link device application.
The CDROM included with the demonstration board contains two firmware codes (STVD projects). The first code sets the application to binary sensor mode, while the other works as a binary actuator. Both support the SIO (serial input/output) communication mode only.
The IO-Link device software stack is available from MESCO engineering GmbH.
技术特性
- IO-Link device - sensor/actuator functionality
- Three-wire connection
- Supports all communication speeds: COM1, COM2 and COM3 (4.8, 38.4 and 230 kbps)
- Additional digital input/output
- I²C communication between STM8S103F3 and L6362 physical layer
- Fully protected solution (overvoltage, shortcircuit, overtemperature)
- Supply voltage: 8 - 32.5 VDC
- Selectable system supply voltage: 5 V / 3.3 V with integrated voltage regulator
- Dual LED diagnostics
- Integrated surge protection in accordance with IEC61000-4-5/500 Ω impedance
- IO-Link communication stack implemented by MESCO engineering
- Compact solution - small component count
- 11.059 MHz system clock (±2%)
- RoHS compliant
| 功能框图
 |
STEVAL-IFP013V1 订购信息
| 订购型号 |
产品状态 |
美金价格 |
数量 |
封装 |
包装形式 |
温度范围 |
材料声明 |
| STEVAL-IFP013V1 |
Preview |
|
1000 |
|
|
|
|
DATA BRIEF
| 描述 |
版本 |
大小 |
| STEVAL-IFP013V1 : IO-Link device demonstration board based on the STM8S103F3 and L6362 |
1 |
237KB |
APPLICATION NOTES
| 描述 |
版本 |
大小 |
| AN3031: SCLT3-8 input termination demonstration board STEVAL-IFP013V1 |
1 |
1353KB |
BILL OF MATERIALS
SCHEMATIC PACKS
PCB LAYOUTS
