STEVAL-ISA044V2 A synchronous 900 kHz step-down DC-DC converter with inhibit function based on the ST1S10
The ST1S10 is a step-down DC-DC converter with inhibit function optimized for powering high voltages in LCD applications and low voltage, digital core HDD applications. It replaces the high current linear solution when high power dissipation is a problem. It provides up to 3 A over an input voltage range of 2.5 V to 18 V, and synchronous rectification removes the need for an external Schottky diode. A high internal switching frequency (900 kHz) allows for the use of tiny surface-mount components, as well as the resistor divider to set the output voltage value.Only an inductor and 3 capacitors are required.The current mode PWM architecture and stable operation with low-ESR SMD ceramic capacitors result in low output ripple. To maximize power conversion efficiency in light load, the regulator can work in burst mode automatically. The device can operate in PWM mode with a fixed frequency or synchronized to an external frequency. It switches at a frequency of 900 kHz when the SYNC pin is connected to ground or a fixed voltage (less than 5.5 V), and can synchronize the switching frequency between 400 kHz to 1.2 MHz from external clock that is applied to SYNC pin. A thermal shutdown circuit is integrated and activates at 150 °C. Cycle-by-cycle current limitation provides protection against shorted outputs.The quiescent current is less than 6 μA in inhibit state. The device is available in MLP4x4 and SO-8 ePad packages.
技术特性
- Input voltage range: 2.5 V to 18 V
- Max Iout : 3 A
- High internal switching frequency : 900 kHz
- PWM mode operation with a fixed frequency or synchronized to an external frequency between 400 kHz and 1.2 MHz
- Inhibit pin available
- Quiescent current : < 6 μA in inhibit state
STEVAL-ISA044V2订购信息
| 订购型号 |
产品状态 |
美金价格 |
数量 |
封装 |
包装形式 |
温度范围 |
材料声明 |
| STEVAL-ISA044V2 |
NRND |
|
1000 |
|
|
|
|
DATA BRIEF
| 描述 |
版本 |
大小 |
| STEVAL-ISA044V2 : 3 A synchronous 900 kHz step-down DC-DC converter with inhibit function based on the ST1S10 |
2 |
128KB |
APPLICATION NOTES
| 描述 |
版本 |
大小 |
| AN2093: ST1S03 buck converters for HDD power supplies |
2 |
234KB |
BILL OF MATERIALS
SCHEMATIC PACKS
PCB LAYOUTS
