STEVAL-ISQ010V1 High-side current-sense amplifier demonstration board based on the TSC102
The STEVAL-ISQ010V1 demonstration board is specifically designed for the TSC102 device.
The TSC102 measures a very small voltage drop on a high-side shunt resistor and, using an internally fixed gain, amplifies the difference into a ground-referenced output voltage. The amplification gain is internally fixed. The device is housed in a tiny TSSOP8 package.
Input common-mode and power supply voltages are independent. The common-mode voltage can range from 2.8 V to 30 V during operation. Under absolute maximum rating conditions, the Vp and Vm pins can sustain as much as 60 V to handle events like load-dump conditions, and as low as -16 V to deal with reverse battery conditions.
The supply voltage can range from 3.5 V to 5.5 V, therefore the TSC102 can be supplied by the same voltage regulator used for digital circuits.
Current consumption is less than 450 μA over the temperature range, and low input bias current is less than 7 μA in standard conditions.
技术特性
- Independent supply and input common-mode voltages
- Wide common-mode operating range: 2.8 V to 30 V
- Wide common-mode survival range: -16 V to 60 V (reverse battery and load-dump conditions)
- Low current consumption: Icc max = 450 μA
- Internally fixed gain: 20 V/V
- Integrated fully-accessible operational amplifier for tailor-made signal conditioning
- RoHS compliant
| 功能框图
 |
STEVAL-ISQ010V1 订购信息
| 订购型号 |
产品状态 |
美金价格 |
数量 |
封装 |
包装形式 |
温度范围 |
材料声明 |
| STEVAL-ISQ010V1 |
Active |
|
1000 |
|
|
|
|
DATA BRIEF
| 描述 |
版本 |
大小 |
| STEVAL-ISQ010V1 : High-side current-sense amplifier demonstration board based on the TSC102 |
1 |
76KB |
APPLICATION NOTES
| 描述 |
版本 |
大小 |
| AN2565: PM6680A evaluation kit dual step-down controller with auxiliary voltages |
2 |
1100KB |
BILL OF MATERIALS
SCHEMATIC PACKS
PCB LAYOUTS
