STEVAL-PCC003V1 Low-speed USB demonstration board based on the STUSB03 transceiver and ST7263BE2 microcontroller
For demonstration purposes the USB microcontroller used is the ST72F63BE2 8-bit microcontroller. The STUSB03 connected with a USB controller is ideal for use in mobile phones, digital cameras, printers, PDAs, etc. All the hardware components except the transceiver IC are the same for the STEVAL-PCC003V1 and STEVAL-PCC004V1 demonstration boards. The demonstration board is comprised of one mini-B USB connector, a USB controller, a USB transceiver, two 2-to-4 demultiplexers and all required discrete components (pull-up resistors, series resistors and power supply capacitors).
The device can be configured through a set of jumpers and the main signals can be accessed through test points. The demonstration board is powered from a USB mini-B or, optionally, from an external supply. The STUSB03 transceiver is connected at the USB communication lines of the microcontroller.
技术特性
- Hardware
- Based on the STUSB03, single chip USB transceivers that support both USB fullspeed and USB low-speed operations
- Software
- USB HID demonstration GUI
| 功能框图
 |
STEVAL-PCC003V1 订购信息
| 订购型号 |
产品状态 |
美金价格 |
数量 |
封装 |
包装形式 |
温度范围 |
材料声明 |
| STEVAL-PCC003V1 |
Active |
|
1000 |
|
|
|
|
DATA BRIEF
| 描述 |
版本 |
大小 |
| STEVAL-PCC003V1 : DB0656: Low-speed USB demonstration board based on the STUSB03 transceiver and ST7263BE2 microcontroller |
1 |
205KB |
USER MANUALS
| 描述 |
版本 |
大小 |
| UM0529: STUSB02E and STUSB03 low-speed evaluation boards: STEVAL-PCC004V1 and STEVAL-PCC003V1 |
1 |
547KB |
BILL OF MATERIALS
SCHEMATIC PACKS
PCB LAYOUTS
