STOD03A Dual DC-DC converter for powering AMOLED display

The STOD03A is a dual DC-DC converter for AMOLED display panels. It integrates a step-up and an inverting DC-DC converter making it particularly suitable for battery operated products, in which the major concern is overall system efficiency. It works in pulse skipping mode during low load conditions and PWM-MODE at 1.5 MHz frequency for medium/high load conditions. The high frequency allows the value and size of external components to be reduced. The Enable pin allows the device to be turned off, therefore reducing the current consumption to less than 1 μA. The negative output voltage can be programmed by an MCU through a dedicated pin which implements single-wire protocol. Soft-start with controlled inrush current limit and thermal shutdown are integrated functions of the device.

技术特性

Step-up and inverter converters
Operating input voltage range from 2.3 V to 4.5 V
Synchronous rectification for both DC-DC converters
200 mA output current
4.6 V fixed positive output voltages
Programmable negative voltage by SWIREfrom - 2.4 V to - 5.4 V
Typical efficiency: 85%
Pulse skipping mode in light load condition
1.5 MHz PWM mode control switching frequency
Enable pin for shutdown mode
Low quiescent current: < 1 μA in shutdown mode
Soft-start with inrush current protection
Overtemperature protection
Temperature range: - 40 °C to 85 °C
True-shutdown mode
Fast discharge outputs of the circuits after shutdown
Package DFN12L (3 x 3) 0.6 mm height

功能框图

STOD03A 订购信息

订购型号	产品状态	美金价格	数量	封装	包装形式	温度范围	材料声明
STOD03ATPUR	Active	1.006	1000	VFDFPN 12 3x3x0.55	Tape And Reel	-40 °C-85 °C	STOD03ATPUR

DATASHEET

描述	版本	大小
STOD03A : DS6917: Dual DC-DC converter for powering AMOLED displays	2	1026KB