STi5300 High-performance set-top box decoder

The new STi5300 MPEG-2 decoder from ST provides a step-change in performance for pay TV set-top boxes and digital video recorders.

Delivering 1.33 GOPS of processing power through an ST230 VLIW CPU running at 333 MHz, ST has ensured that manufacturers’ investment in new products is protected as the STi5300 can easily accommodate today’s interactive software, and provides a platform that can support the even more demanding applications of the future. Both Linux and OS21 operating systems are supported, and an MMU provides support for virtual memory management.

The STi5300’s power comes from the VLIW architecture of the ST230 CPU. This allows four instructions to be executed at each CPU cycle, dramatically increasing performance. By maintaining pin compatibility with the STi5100, manufacturers can make use of the STi5300 with minimal hardware redesign

技术特性
  • ST231 VLIW host CPU
    • 333 MHz, 32 Kbyte ICache, 32 Kbyte DCache
    • up to 1.333 GOPs at 333 MHz
    • dynamic memory management through MMU
  • Unified memory interface
  • Package 27 mm x 27 mm PBGA336
    • footprint optimized for 2 layer PCBs
  • Dual transport stream merger
    • supports DVB and DIRECTV®
    • integrated DES-ECB, DVB and ICAM descramblers
    • NDS RASP compliant
    • low-cost DVB-CI and Cable Card support
  • MPEG-2 MP@ML video decoder
    • trick modes including smooth fast forward and rewind
  • Graphics/display
    • 4 display planes
    • 2, 4 and 8 bpp CLUT graphics, 256 x 30 bits (AYCBCr) CLUT entries
    • 16 bpp true color graphics,
    • alpha blending, antialiasing, antiflutter, antiflicker filters
  • PAL/NTSC/SECAM encoder
    • RGB, CVBS, Y/C and YUV outputs with 10-bit DACs
    • encoding of CGMS, Teletext, WSS, VPS, close caption
  • Audio subsystem
    • MPEG-1 layers I/II, MP3
    • Dolby® Digital decoding
    • Dolby Pro Logic® compatible output
    • PCM input, mixing and sample rate conversion
    • SRS/TruSurroundXT® virtual surround sound
    • simultaneous MPEG audio decode and output of Dolby streams
  • On-chip peripherals
    • 4 ASCs (UARTs) with Tx and Rx FIFOs
    • 6 parallel 8-bit I/O banks
    • 2 smartcard interfaces and clock generators
    • 3 SSCs for I²C/SPI master/slave interfaces
    • SiLabs line side (DAA) interface
    • USB 1.1/2.0 host, OHCI/EHCI compliant
    • DiSEqC 2.0™ interface
  • Enhanced security
功能框图
STi5300 订购信息
订购型号 产品状态 美金价格 数量 封装 包装形式 温度范围 材料声明
STI5300FUB NRND     PBGA 336 27x27x2.6 Tray   STI5300FUB
STI5300ZUB NRND     PBGA 336 27x27x2.6 Tray   STI5300ZUB
STI5300NUB NRND     PBGA 336 27x27x2.6 Tray   STI5300NUB
STI5300FUBT NRND     PBGA 336 27x27x2.6 Tape And Reel   STI5300FUBT
STI5300NUBT NRND     PBGA 336 27x27x2.6 Tape And Reel   STI5300NUBT
DATA BRIEF
描述 版本 大小
STi5300 : High-performance set-top box decoder 1 87KB