USBDF 2-line EMI filter and ESD protection with R pull-up, for USB interfaces

The USB specification requires USB downstream ports to be terminated with pull-down resistors from the D+ and D- lines to ground. On the implementation of USB systems, the radiated and conducted EMI should be kept within the required levels as stated by the FCC regulations. In addition to the requirements of termination and EMC compatibility, the computing devices are required to be tested for ESD susceptibility.

The USBDFxxW5 provides the recommended line termination while implementing a low pass filter to limit EMI levels and providing ESD protection which exceeds IEC 61000-4-2 level 4 standard. The device is packaged in a SOT323-5L, which is a very small (50% smaller than the standard SOT23).

技术特性
USBDF 订购信息
订购型号 产品状态 美金价格 数量 封装 包装形式 温度范围 材料声明
USBDF01W5 Active   1000 SOT-323 5L Tape And Reel   USBDF01W5
USBDF02W5 Active   1000 SOT-323 5L Tape And Reel   USBDF02W5
DATASHEET
描述 版本 大小
USBDF: Parallel port single termination network with ±15 kV ESD protection 4 207KB