VN5160S-E Single channel high side drive for automotive applications
The VN5160S-E is a monolithic device made using STMicroelectronics VIPower M0-5 technology. It is intended for driving resistive or inductive loads with one side connected to ground. Active VCC voltage clamp protects the device against low energy spikes.The device detects open load condition both in on and off state, when STAT_DIS is left open or driven low.
Output shorted to VCC is detected in the off state.When STAT_DIS is driven high, STATUS is in a high impedance condition. Output current limitation protects the device in overload condition. In case of long duration overload, the device limits the dissipated power to safe level up to thermal shut-down intervention. Thermal shutdown with automatic restart allows the device to recover normal operation as soon as fault condition disappears.
技术特性
- Main
- Inrush current active management by power limitation
- Very low stand-by current
- 3.0V CMOS compatible input
- Optimized electromagnetic emission
- Very low electromagnetic susceptibility
- In compliance with the 2002/95/EC european directive
- Diagnostic Functions
- On state open load detection
- Off state open load detection
- Thermal shutdown indication
- Protection
- Output stuck to Vcc detection
- Self limiting of fast thermal transients
- Protection against loss of ground and loss of VCC
- Reverse battery protection
- Electrostatic discharge protection
|
功能框图
 |
VN5160S-E 订购信息
| 订购型号 |
产品状态 |
美金价格 |
数量 |
封装 |
包装形式 |
温度范围 |
材料声明 |
| VN5160S-E |
Active |
0.573 |
1000 |
SO-8 |
Tube |
|
VN5012AKTR-E |
| VN5160STR-E |
Active |
0.573 |
1000 |
SO-8 |
Tape And Reel |
|
VN5160S-E |
DATASHEET
| 描述 |
版本 |
大小 |
| VN5160S-E : Single-channel high side driver for automotive applications |
4 |
416KB |
