VND5160J-E Double channel high side driver for automotive applications

The VND5160J-E is a monolithic device made using STMicroelectronics VIPower M0-5 technology. It is intended for driving resistive or inductive loads with one side connected to ground. Active VCC pin voltage clamp protects the device against low energy spikes (see ISO7637 transient compatibility table).

The device detects open load condition in both ON and OFF states, when STAT_DIS is left open or driven low. Output shorted to VCC is detected in the OFF state.

When STAT_DIS is driven high, the STATUS pin is in a high impedance condition.

Output current limitation protects the device in overload condition. In case of long duration overload, the device limits the dissipated power to safe level up to thermal shut-down intervention. . Thermal shut-down with automatic restart allows the device to recover normal operation as soon as fault condition disappears.

技术特性

General
- Inrush current active management by power limitation
- Very low stand-by current
- 3.0V CMOS compatible input
- Optimized electromagnetic emission
- Very low electromagnetic susceptibility
- In compliance with the 2002/95/EC European directive
Diagnostic functions
- Open drain status output
- On state open load detection
- Off state open load detection
- Thermal shutdown indication
Protection
- Undervoltage shut-down
- Overvoltage clamp
- Output stuck to Vcc detection
- Load current limitation
- Self limiting of fast thermal transients
- Protection against loss of ground and loss of VCC
- Thermal shut down
- Reverse battery protection
- Electrostatic discharge protection

功能框图

VND5160J-E 订购信息

订购型号	产品状态	美金价格	数量	封装	包装形式	温度范围	材料声明
VND5160JTR-E	Active	1.366		PowerSSO 12	Tape And Reel		VND5160JTR-E
VND5160J-E	Active	1.366		PowerSSO 12	Tube		VND5160J-E

DATASHEET

描述	版本	大小
VND5160J-E : Double channel high side driver for automotive applications	5	538KB