• 简体中文
• English

ATA5575M1

Contactless read/write IDIC® designed for acces control and logistics applications in the 100-kHz or 150-kHz frequency band. Especially tested and pre-configured for use as Consumer7 Industrial tag in the wideley used 'Unique Format'. This uses 64 bits of the memory where 40 bits of teh memory are user bits and data. The data rate is RF/64 and Manchester ASK modulation is used. For porprietary applications also the complete memory with 128 bits can be used. A single coil connected to the chip serves as the IC's power supply and bi-directional communication interface. The antenna and chip together form a transponder or tag. The on-chip 128-bit user EEPROM (16 bytes with 8 bits each) can be read and written block-wise from a reader. This device is optimized for maximum read range. Programming is possible, but the write range is limited. The chip has to be locked after loading the application-specific data into the device.

DataSheet 数据手册

• ATA5575M1 Complete(文件大小: 724 KB, 22 页数, 修订版 G, 更新时间: 08/2014)

Application Note

• ATAN0021: Explaining the Difference between Atmel ATA5575 Types(文件大小: 82 KB, 3 页数, 修订版 B, 更新时间: 03/2015)
• ATAN0078: The Atmel ATA5575 and Atmel ATA5577: Write and Programming Sequence Differences(文件大小: 277 KB, 6 页数, 修订版 B, 更新时间: 04/2015)
• Manchester Coding Basics(文件大小: 328 KB, 24 页数, 修订版 B, 更新时间: 07/2015)

Brochures and Flyers

• Atmel 创新性半导体 RFID IDIC® 解决方案(文件大小: 4.51 MB, 12 页数, 修订版 L, 更新时间: 01/2016)