ADM489A 5 V, Slew-Rate Limited, Low Power, 250 kbps, Full Duplex EIA RS-485 Transceiver (with DE/RE)

The ADM488A and ADM489A are low power, differential line transceivers suitable for communication on multipoint bus transmission lines. They are intended for balanced data transmission and comply with both RS-485 and RS-422 standards of the Electronics Industries Association (EIA). Both products contain a single differential line driver and a single differential line receiver, making them suitable for full-duplex data transfer. The ADM489A contains an additional receiver and driver enable control. Applications

The input impedance is 12 kΩ, allowing 32 transceivers to be connected on the bus. The ADM488A/ADM489A operate from a single 5 V ± 10% power supply.

Excessive power dissipation that is caused by bus contention or output shorting is prevented by a thermal shutdown circuit. This feature forces the driver output into a high impedance state if, during fault conditions, a significant temperature increase is detected in the internal driver circuitry. The receiver contains a fail-safe feature that results in a logic high output state if the inputs are unconnected (floating).

The ADM488A/ADM489A are fabricated on BiCMOS, an advanced mixed technology process combining low power CMOS with fast switching bipolar technology.

The ADM488A/ADM489A are fully specified over the industrial temperature range and are available in SOIC and MSOP packages.

产品特点和性能优势
  • Complies with ANSI TIA/EIA-485-A-1998 and ISO 8482: 1987(E)
  • 250 kbps data rate
  • Single 5 V ± 10% supply
  • −7 V to +12 V bus common-mode range
  • Connect up to 32 nodes on the bus
  • Reduced slew rate for low EM interference
  • Short-circuit protection
  • 30 μA supply current
  • 接口和隔离
    数据手册
    文档备注
    ADM488A/ADM489A: Full-Duplex, Low Power,Slew Rate Limited, EIA RS-485 Transceivers Data Sheet (Rev. B)PDF 281 kB
    应用笔记
    文档备注
    AN-1176:二进制.Bxl文件格式的元件尺寸和符号 (Rev. 0)PDF 671 kB
    AN-1176: Component Footprints and Symbols in the Binary .Bxl File Format (Rev. 0)PDF 671 kB
    订购信息
    产品型号封装包装数量温度范围美金报价 100-499美金报价 1000+RoHS
    ADM489ABRMZ 量产10 ld MSOPOTH 50-40 至 85至1.291.1Y
    ADM489ABRMZ-REEL7 量产10 ld MSOPREEL 1000-40 至 85至01.1Y
    ADM489ABRZ 量产14 ld SOICOTH 56-40 至 85至1.241.05Y
    ADM489ABRZ-REEL7 量产14 ld SOICREEL 1000-40 至 85至01.05Y
    评估板
    产品型号描述美金报价RoHS
    EVAL-RS485FDEBZEvaluation Board30Y
    参考资料
    ADM488A/ADM489A: Full-Duplex, Low Power,Slew Rate Limited, EIA RS-485 Transceivers Data Sheet (Rev. B) adm488a
    AN-1176:二进制.Bxl文件格式的元件尺寸和符号 (Rev. 0) adn4670
    AN-1176: Component Footprints and Symbols in the Binary .Bxl File Format (Rev. 0) adn4670
    Emerging Energy Applications Solutions Bulletin, Volume 10, Issue 4 ad7656
    Test & Instrumentation Solutions Bulletin, Volume 10, Issue 3 ad7780