BTS54040-LBE

The BTS54040-LBE is a four channel high-side smart power switch in TSON-24-1 package providing embedded protective functions. It is specially designed to control standard exterior lighting in automotive applications. In order to use the same hardware, the device can be configured to bulb or LED mode. As a result, both load types are optimized in terms of switching and diagnosis behavior. It is designed to drive exterior lamps up to 27 W or the equivalent LED light.

ParametricBTS54040-LBE
Channels4.0
Channel Mix4*39mohm
LED modeYes
PWM Engine IntegratedNo
External Drive CapabilityYes
Adjustable SlewrateNo
ReversaveTMNo
Sales Product NameBTS54040-LBE
OPNBTS54040LBEAUMA1
Product Statusactive and preferred
Package NamePG-TSON-24
Completely lead freeno
Halogen freeyes
RoHS compliantyes
Packing Size2500
Packing TypeTAPE & REEL
Moisture Level3
Summary of Features:
  • 8-bit serial peripheral interface (daisy chain capable SPI) for control and diagnosis.
  • PWM driving possible through direct inputs or via SPI
  • Integrated control for one external smart power switch  Selectable AND-/ OR- combination for the parallel inputs (PWM control)
  • Load type configuration via SPI (bulb or LEDs)
  • Very low Stand By current
  • Fail Safe activation via Limp Home pin and  configuration via input pins only
  • Green Product (RoHS-Compliant)
  • AEC Qualified.
Benefits:
  • Full modularity of the SPOC+ Family enables development re-use and quick adaptation to loadlist changes
  • Extra small leadless package (TSON24) helps reduce the PCB area
  • Simplified overal PCB layout, small PCB area, reduced bill of material on system level
  • Control of one external PROFETs through SPI gives the flexibility to use scalable, pin compatible devices to drive optional loads
  • Smaller MCU package required as control is done via SPI daisy chains
  • Added diagnostics via SPI in addition to multiplexed current sense
  • Module quality improvement using a pre-tested "system on chip" device and simplified design
Target Applications:
  • Highside power switch for 12 V grounded loads
  • Especially designed for standard exterior lighting like high beam, low beam, indicator, parking light, using bulbs or LEDs
  • Further automotive and industrial applications such as heating, motor driving, energy and power distribution
  • Replaces electromechanical relays with fuses, as well as discrete chip sets
功能框图
Data Sheet
TitleSizeDateVersion
BTS54040-LBE Data Sheet2.5 MB20 八月 201402_00
Product Information
TitleSizeDateVersion
SPOC Movie1.9 MB03 四月 2008
Application Notes
TitleSizeDateVersion
SPOC™+ 12V - Short Circuit to VS and Open Load Detection560 KB30 九月 201301_00
Additional Technical Information
TitleSizeDateVersion
SPOC+ Pocket Guide1 MB15 五月 2013
Product Selection Guide
TitleSizeDateVersion
Automotive Power Selection GuideEN10.6 MB19 一月 201601_01
Material Content SheetInfo
TitleSizeDateVersion
MCDS_2013-08-29_12-26-56_MA001141658_PG-TSON-24-3.pdf23 KB31 十月 201301_00
PCB Design Data
TitleSizeDateVersion
PCB Footprints and Symbols - BTS54040-LBE - Multichannel SPI High Side Power Controller SPOC™ - Eagle - v2.0.zipEN3 KB27 十月 201501_00
PCB Footprints & Symbols - SPOC_-_SPI_Power_Controller - Cadence - v2.0124 KB24 十月 201302_00
PCB Footprints and Symbols - BTS54040-LBE - Multichannel SPI High Side Power Controller SPOC™ - Mentor - v2.0.zipEN3 KB27 十月 201501_00
PCB Footprints and Symbols - BTS54040-LBE - Multichannel SPI High Side Power Controller SPOC™ - Altium - v2.0.zipEN556 KB27 十月 201501_00
PCB Footprints and Symbols - BTS54040-LBE - Multichannel SPI High Side Power Controller SPOC™ - Cadence - v2.0.zipEN26 KB27 十月 201501_00
Evaluation Boards
BoardFamilyDescriptionStatus
BTS54040-LBE DAUGHTERBRDHigh/Low Side SwitchThe BTS54040-LBE Daughterboard is a small PCB with soldered SPOC+ device on it. It has to be used in combination with the SPOC+ main demo boardBTS 54040-LBEon request
SPOC+ EVALUATIONKIT2High/Low Side SwitchEvaluationkit enables the device evaluation and accelerates the design-in phase. The Evaluation Board can be connected to the “XC2000 power easy kit” and controlled, via USB, using a powerful and intuitive Graphical User Interface (GUI) installed on your computer. The evaluation Kit contains a SPOC+ main demoboard, one daughterboard for BTS56033-LBA, BTS54040-LBE and BTS54220-LBEon request
SPOC+ MAIN DEMOBOARDHigh/Low Side SwitchSPOC+ Evaluation Board enables the device evaluation and accelerates the design-in phase. The Evaluation Board can be connected to the “XC2000 power easy kit” and controlled, via USB, using a powerful and intuitive Graphical User Interface (GUI) installed on your computer. This board is just the main demoboard to be used with the daughterboard of the different SPO+ products. Daugherboards are not included and have to be ordered separately.on request
Package Data
TitleSizeDateVersion
PG-TSON-24-3 | BTS54040LBEAUMA1EN546 KB11 四月 201601_00
PCB Design Data
TitleSizeDateVersion
PCB Footprints and Symbols - BTS54040-LBE - Multichannel SPI High Side Power Controller SPOC™ - Eagle - v2.0.zipEN3 KB27 十月 201501_00
PCB Footprints & Symbols - SPOC_-_SPI_Power_Controller - Cadence - v2.0124 KB24 十月 201302_00
PCB Footprints and Symbols - BTS54040-LBE - Multichannel SPI High Side Power Controller SPOC™ - Mentor - v2.0.zipEN3 KB27 十月 201501_00
PCB Footprints and Symbols - BTS54040-LBE - Multichannel SPI High Side Power Controller SPOC™ - Altium - v2.0.zipEN556 KB27 十月 201501_00
PCB Footprints and Symbols - BTS54040-LBE - Multichannel SPI High Side Power Controller SPOC™ - Cadence - v2.0.zipEN26 KB27 十月 201501_00
BTS54040-LBE Data Sheet BTS54040-LBE
SPOC Movie BTS56033-LBA
SPOC™+ 12V - Short Circuit to VS and Open Load Detection BTS56033-LBA
SPOC+ Pocket Guide BTS56033-LBB
EN TLE8203E
MCDS_2013-08-29_12-26-56_MA001141658_PG-TSON-24-3.pdf BTS54040-LBE
EN BTS54040-LBE
PCB Footprints & Symbols - SPOC_-_SPI_Power_Controller - Cadence - v2.0 BTS56033-LBA