IFX9201SG

The IFX9201SG a general purpose 6A H-bridge for industrial applications, home appliance and building automation, power tools battery management and medical applications, designed for the control of small DC motors and inductive loads is availabe from Infineon now. The outputs can be pulse width modulated at frequencies up to 20kHz - that enables operation above the human sonic range - by means of PWM/DIR control. While the signal at the direction input defines the direction of the DC motor, the PWM signal controls the duty cycle. For load currents above the current limitation threshold (7A typ.) the H-Bridge switches into chopper current limitation mode. The TLE9201SG is protected against short circuits and over temperature and provides diagnosis via SPI or basic error feedback via status flag. Open load can be detected when the bridge is disabled or during PWM operation of inductive loads. The robust PG-DSO-12-17 package provides excellent thermal performance due to the thick copper heat slug. Thanks to the protruding edges of the heat slug the package is well suited for automatic optical solder inspection.

H-BRIDGE KIT 2GO with the H-Bridge IFX9201

ParametricIFX9201SG
RDS (on)200.0mΩ
ID(lim)(multiple)6.0 A
ID(lim)(multiple)10.0 A
Iq50.0µA
Operating Voltage  min  max5.0V  36.0V
DiagnosticsSPI & Status Flag
ProtectOC
ProtectOT
ProtectSC
InhibitNo
Temperature- 40°C - 150°C
MountingSMT
Sales Product NameIFX9201SG
OPNIFX9201SGAUMA1
Product Statusactive and preferred
Package NamePG-DSO-12
Completely lead freeno
Halogen freeyes
RoHS compliantyes
Packing Size1000
Packing TypeTAPE & REEL
Moisture Level3
Summary of Features:
  • RDSon (typ.) < 100mΩ per switch
  • Operation Voltage 4.5V to 36 V
  • Logic inputs: 3.3-V and 5-V TTL/ 5-V CMOS compatible
  • Low standby current
  • Short circuit and over-temperature protection
  • VS under-voltage protection
  • Open load detection in ON and OFF state
  • Detailed SPI diagnosis or simple error flag
  • Green product (RoHS compliant)
Benefits:
  • Small package saves board space
  • Includes over current and over temperature protection
  • Simple design with few external components
  • SPI enables for easy Diagnosis
Target Applications:
  • DC motor control for industrial applications
  • Home and building automation
  • Power tools battery management
  • Industrial robotic
  • Medical applications
Data Sheet
TitleSizeDateVersion
IFX9201SG Data Sheet,EN1.5 MB15 二月 201501_01
Product Brief
TitleSizeDateVersion
IFX9201SG Product BriefEN592 KB18 一月 201601_00
Product Selection Guide
TitleSizeDateVersion
Automotive Power Selection GuideEN10.6 MB19 一月 201601_01
Material Content SheetInfo
TitleSizeDateVersion
MCDS_2015-08-20_09-27-58_MA001281548_PG-DSO-12-17.pdfEN27 KB20 八月 201501_00
MCDS_2015-08-20_09-35-55_MA001282194_PG-DSO-12-17.pdfEN27 KB20 八月 201501_00
MCDS_2015-08-20_09-34-59_MA001409748_PG-DSO-12-17.pdfEN27 KB20 八月 201501_00
MCDS_2015-08-20_09-34-16_MA001409788_PG-DSO-12-17.pdfEN27 KB20 八月 201501_00
PCB Design Data
TitleSizeDateVersion
PCB Footprints and Symbols - IFX9201SG - Integrated Full-Bridge Driver - Altium - v1.0.zipEN557 KB03 七月 201501_00
PCB Footprints and Symbols - IFX9201SG - Integrated Full-Bridge Driver - Mentor - v1.0.zipEN3 KB03 七月 201501_00
PCB Footprints and Symbols - IFX9201SG - Integrated Full-Bridge Driver - Eagle - v1.0.zipEN2 KB03 七月 201501_00
PCB Footprints and Symbols - IFX9201SG - Integrated Full-Bridge Driver - Cadence - v1.0.zipEN13 KB03 七月 201501_00
Evaluation Boards
BoardFamilyDescriptionStatus
H-BRIDGE KIT 2GOMotor Driver (F/H-Bridge)The H-Bridge Kit 2GO is a ready to use evaluation kit. It is fully populated with all electronic components equipped with the H-Bridge IFX9201 combined with an ARM® Cortex™-M0 CPU. Realize your own DC motor control. It is designed for the control of DC motors or other inductive loads up to 6 A or up to 36 V of SupplyIFX9201SGon request
Simulation Tool
TitleSizeDateVersion
Simulate ONLINE - IFX9201SG with Inductive LoadEN847 B01 三月 201603_00
Package Data
TitleSizeDateVersion
PG-DSO-12-17 | IFX9201SGAUMA1EN481 KB11 四月 201601_00
PCB Design Data
TitleSizeDateVersion
PCB Footprints and Symbols - IFX9201SG - Integrated Full-Bridge Driver - Altium - v1.0.zipEN557 KB03 七月 201501_00
PCB Footprints and Symbols - IFX9201SG - Integrated Full-Bridge Driver - Mentor - v1.0.zipEN3 KB03 七月 201501_00
PCB Footprints and Symbols - IFX9201SG - Integrated Full-Bridge Driver - Eagle - v1.0.zipEN2 KB03 七月 201501_00
PCB Footprints and Symbols - IFX9201SG - Integrated Full-Bridge Driver - Cadence - v1.0.zipEN13 KB03 七月 201501_00
EN IFX9201SG
EN IFX9201SG
EN TLE8203E
EN IFX9201SG
EN IFX9201SG
EN IFX9201SG
EN IFX9201SG
EN IFX9201SG
EN IFX9201SG
EN IFX9201SG
EN IFX9201SG
EN IFX9201SG