TLE7250SJ

The TLE7250 is a transceiver designed for HS CAN networks in automotive and industrial applications. As an interface between the physical bus layer and the CAN protocol controller, the TLE7250 drives the signals to the bus and protects the microcontroller against interferences generated within the network. Based on the high symmetry of the CANH and CANL signals, the TLE7250 provides a very low level of electromagnetic emission (EME) within a wide frequency range. The TLE7250 is available in a small, leadless PG-TSON-8 package and in a PG-DSO-8 package. Both packages are RoHS compliant and halogen free. Additionally the PG-TSON-8 package supports the solder joint requirements for automated optical inspection (AOI). The TLE7250LE and the TLE7250SJ are fulfilling or exceeding the requirements of the ISO11898-2. The TLE7250 provides a receive-only mode and a power-save mode. It is designed to fulfill the enhanced physical layer requirements for CAN FD and supports data rates up to 2 MBit/s. On the basis of a very low leakage current on the HS CAN bus interface the TLE7250 provides an excellent passive behavior in power-down state. These and other features make the TLE7250 exceptionally suitable for mixed supply HS CAN networks. Based on the Infineon Smart Power Technology SPT, the TLE7250 provides excellent ESD immunity together with TLE7250LE TLE7250SJ Overview Data Sheet 4 Rev. 1.0, 2015-08-12 a very high electromagnetic immunity (EMI). The TLE7250 and the Infineon SPT technology are AEC qualified and tailored to withstand the harsh conditions of the automotive environment. Three different operating modes, additional fail-safe features like a TxD time-out and the optimized output slew rates on the CANH and CANL signals, make the TLE7250 the ideal choice for large HS CAN networks with high data transmission rates.

ParametricTLE7250SJ
Transmission Rate2.0MBit/s
Quiescent Current< 12 µA @ 5V standby
Bus Wake-Up CapabilityNo
Additional FeaturesNRM, NEN
Wake-up InputsNone
StandardsISO11898-2
QualificationAutomotive
TypeCAN FD
FeaturesNRM
FeaturesNEN
Supply Voltage5 V
TypeCAN
Sales Product NameTLE7250SJ
OPNTLE7250SJXUMA1
Product Statusactive and preferred
Package NamePG-DSO-8
Completely lead freeyes
Halogen freeyes
RoHS compliantyes
Packing Size2500
Packing TypeTAPE & REEL
Summary of Features:
  • Fully compatible to ISO 11898-2
  • Wide common mode range for electromagnetic immunity (EMI)
  • Very low electromagnetic emission (EME)
  • Excellent ESD robustness
  • Guaranteed loop delay symmetry to support CAN FD data frames up to 2 MBit/s
  • Extended supply range on VCC supply
  • CAN short circuit proof to ground, battery and VCC
  • TxD time-out function
  • Low CAN bus leakage current in power-down state
  • Overtemperature protection
  • Protected against automotive transients
  • Receive-only mode and power-save mode
  • Green Product (RoHS compliant)
  • Two package variants: PG-DSO-8 and PG-TSON-8
  • AEC Qualified
Data Sheet
TitleSizeDateVersion
TLE7250 Data Sheet,EN2 MB18 九月 201501_00
Application Notes
TitleSizeDateVersion
Application Note TLE7250EN431 KB11 五月 201601_01
Whitepaper
TitleSizeDateVersion
The Physical Layer in the CAN FD World - White PaperEN900 KB03 二月 201601_00
Material Content SheetInfo
TitleSizeDateVersion
MCDS_2015-09-28_06-04-38_MA001403414_PG-DSO-8-64.pdfEN28 KB28 九月 201501_00
Package Data
TitleSizeDateVersion
PG-DSO-8-64 | TLE7250SJXUMA1EN473 KB11 四月 201601_00
EN TLE7250LE
EN TLE7250LE
EN TLE7251VLE
EN TLE7250SJ
EN TLE7250SJ