TLE82453-3SA

The TLE 82453 is a flexible, monolithic solenoid driver IC designed for the control of linear solenoids in automatic transmission, electronic stability control, and active suspension applications. The three channels can be used as either low-side or high-side drivers in any combination. The device includes the drive transistor, recirculation transistor, and current sensing resistor; minimizing the number of required external components. This device is capable of regulating the average current flow in a load up to 1500 mA, depending on the dither settings and the load characteristics, with 0.73 mA resolution. A triangular dither waveform generator, when enabled, superimposes a triangular waveform with programmable amplitude and frequency on the programmed current setpoint

ParametricTLE82453-3SA
Channels3.0
Output Current1.6A
RDS (on) (multiple)250 (max)
Quiescent Current0,008 mA
Operating Voltage  min  max5.5V  40.0V
SPI32.0Bit
Comments3 Channel Integrated Constant Current Control IC
Sales Product NameTLE82453-3SA
OPNTLE824533SAAUMA1
Product Statusactive and preferred
Package NamePG-DSO-36
Completely lead freeno
Halogen freeyes
RoHS compliantyes
Packing Size800
Packing TypeTAPE & REEL
Moisture Level3
Summary of Features:
  • Three independent low side / high side configurable channels
  • Integrated half-bridge power stages
  • RON(max) = 250 mOhms@ Tj = 150 °C
  • Integrated sense resistor with internal TCR compensation
  • Load current measurement range = 0 mA to 1500 mA (typical)
  • Current setpoint resolution = 0.73 mA
  • Current control accuracy (-40C to 125C)
  • +/- 5mA for load currents less than 500 mA
  • +/- 1% for load currents greater than 500 mA
  • Current control accuracy (-40C to 150C)
  • +/- 7.5mA for load currents less than 500 mA
  • +/- 1.5% for load currents greater than 500 mA
  • Excellent immunity to large load supply voltage changes
  • Integrated dither generator with programmable amplitude & frequency
  • SPI interface for output control, diagnosis, and configuration
  • Independent thermal shutdown for each channel
  • Open load, switch bypass, and over-current protection and diagnosis for each channel
  • Programmable slew rate control for reduced EMI
  • Green Product (RoHS compliant)
  • AEC Qualified
Benefits:
  • +/- 1% Current Accuracy for Entire Channel (-40C to 125C)
  • Very Fast Current Step Response (dependent on solenoid characteristics)
  • Near ZERO Over/Under-shoot on step Response
  • Excellent Battery Ripple Rejection
  • AutoZero feature (automatically eliminates offset error)
  • Ease of use
  • Integrated Power Devices
  • Minimizes number of components placement, simplifies PCB layout
  • Enables current limitation, slew rate control and thermal protection
  • Improved Short-to-Battery performance
  • Integrated Shunt
  • Enables calibration of current accuracy at IC test
  • Simplifies module calibration
  • Active Recirculation
  • Reduces power dissipation
  • Enables integration
  • Enables HS/LS Configuration
Target Applications:
  • Variable force solenoids (e.g. automatic transmission solenoids)
  • Constant current controlled solenoids like
  • Idle Speed Control
  • Exhaust Gas Recirculation
  • Valve control
  • Suspension Control
Data Sheet
TitleSizeDateVersion
TLE82453-3SA Data Sheet,EN2.6 MB06 五月 201501_00
Product Selection Guide
TitleSizeDateVersion
Automotive Power Selection GuideEN10.6 MB19 一月 201601_01
Material Content SheetInfo
TitleSizeDateVersion
MCDS_2015-05-18_08-41-07_MA001270292_PG-DSO-36-54.pdfEN27 KB18 五月 201501_00
Package Data
TitleSizeDateVersion
PG-DSO-36-54 | TLE824533SAAUMA1EN712 KB11 四月 201601_00
EN TLE82453-3SA
EN TLE8203E
EN TLE82453-3SA
EN TLE82453-3SA