LT1712 - Single/Dual 4.5ns, 3V/5V/±5V, Rail-to-Rail Comparators

The LT1711/LT1712 is designed for ease of use in a variety of systems. In addition to the wide supply voltage flexibility, the rail-to-rail input common mode range extends 100mV beyond both supply rails, and the outputs are protected against phase reversal for inputs extending further beyond the rails. Also, the rail-to-rail inputs may be taken to opposite rails with no significant increase in input current. The rail-to-rail matched complementary outputs interface directly to TTL or CMOS logic and can sink 10mA to within 0.5V of GND or source 10mA to within 0.7V of V+.

The LT1711/LT1712 has an internal TTL/CMOS compatible latch for retaining data at the outputs. The latch holds data as long as the latch pin is held high. Latch pin hysteresis provides protection against slow moving or noisy latch signals. The LT1711 is available in the 8-pin MSOP package. The LT1712 is available in the 16-pin narrow SSOP package.

特点
  • Ultrafast: 4.5ns at 20mV Overdrive5.5ns at 5mV Overdrive
  • Rail-to-Rail Inputs
  • Rail-to-Rail Complementary Outputs (TTL/CMOS Compatible)
  • Specified at 2.7V, 5V and ±5V Supplies
  • Output Latch
  • Inputs Can Exceed Supplies Without Phase Reversal
  • LT1711: 8-Lead MSOP Package
  • LT1712: 16-Lead Narrow SSOP Package
典型应用
LT1712 Typical Application
LT1712 Typical Application
应用
  • High Speed Automatic Test Equipment
  • Current Sense for Switching Regulators
  • Crystal Oscillator Circuits
  • High Speed Sampling Circuits
  • High Speed A/D Converters
  • Pulse Width Modulators
  • Window Comparators
  • Extended Range V/F Converters
  • Fast Pulse Height/Width Discriminators
  • Line Receivers
  • High Speed Triggers
封装信息
LT1712 Package Drawing
LT1712 Package Drawing
Order Information 订购型号
器件型号封装温度价格 (以 1 ~ 99 片为批量)价格 (以 1000 片为批量) *
LT1712CGN#PBFSSOP-16C$4.00$3.35
LT1712CGN#TRPBFSSOP-16C$3.41
LT1712IGN#PBFSSOP-16I$4.20$3.55
LT1712IGN#TRPBFSSOP-16I$3.61
数据表
应用指南
设计要点
可靠性数据
产品选择卡
LT Journal
CAD 符号
相关产品
LT1711/LT1712 - Single/Dual 4.5ns, 3V/5V/±5V, Rail-to-Rail Comparators
AN101 - Minimizing Switching Regulator Residue in Linear Regulator Outputs
DN248 - Rail-to-Rail I/O and 2.4V Operation Allow UltraFast Comparators to be Used on Low Voltage Supplies
R377 Reliability Data
High Speed Comparators
Feb 2001 New UltraFast Comparators: Rail-to-Rail Inputs and 2.4V Operation Allow Use on Low Supplies
LT1712 Footprints and Symbols