LTC1562 - Very Low Noise, Low Distortion Active RC Quad Universal Filter

The LTC®1562 is a low noise, low distortion continuous-time filter with rail-to-rail inputs and outputs, optimized for a center frequency (fO) of 10kHz to 150kHz. Unlike most monolithic filters, no clock is needed. Four independent 2nd order filter blocks can be cascaded in any combination, such as one 8th order or two 4th order filters. Each block’s response is programmed with three external resistors for center frequency, Q and gain, using simple design formulas. Each 2nd order block provides lowpass and bandpass outputs. Highpass response is available if an external capacitor replaces one of the resistors. Allpass, notch and elliptic responses can also be realized.

The LTC1562 is designed for applications where dynamic range is important. For example, by cascading 2nd order sections in pairs, the user can configure the IC as a dual 4th order Butterworth lowpass filter with 94dB signal-to-noise ratio from a single 5V power supply. Low level signals can exploit the built-in gain capability of the LTC1562. Varying the gain of a section can achieve a dynamic range as high as 118dB with a ±5V supply.

Other cutoff frequency ranges can be provided upon request. Please contact LTC Marketing.

特点
  • Continuous Time—No Clock
  • Four 2nd Order Filter Sections, 10kHz to 150kHz Center Frequency
  • ±0.5% Typical Center Frequency Accuracy
  • ±0.3% Typical Center Frequency Accuracy (A Grade)
  • Wide Variety of Response Shapes
  • Lowpass, Bandpass and Highpass Responses
  • 103dB Typical S/N, ±5V Supply (Q = 1)
  • 97dB Typical S/N, Single 5V Supply (Q = 1)
  • 96dB Typical S/(N + THD) at ±5V Supply, 20kHz Input
  • Rail-to-Rail Input and Output Voltages
  • DC Accurate to 3mV (Typ)
  • “Zero-Power” Shutdown Mode
  • Single or Dual Supply, 5V to 10V Total
  • Resistor-Programmable fO, Q, Gain
典型应用
LTC1562 Typical Application
LTC1562 Typical Application
应用
  • High Resolution Systems (14 Bits to 18 Bits)
  • Antialiasing/Reconstruction Filters
  • Data Communications, Equalizers
  • Dual or I-and-Q Channels (Two Matched 4th Order Filters in One Package)
  • Linear Phase Filtering
  • Replacing LC Filter Modules
封装信息
LTC1562 Package Drawing
LTC1562 Package Drawing
Order Information 订购型号
器件型号封装温度价格 (以 1 ~ 99 片为批量)价格 (以 1000 片为批量) *
LTC1562ACG#PBFSSOP-20C$13.90$11.75
LTC1562ACG#TRPBFSSOP-20C$11.85
LTC1562AIG#PBFSSOP-20I$15.30$12.95
LTC1562AIG#TRPBFSSOP-20I$13.05
LTC1562CG#PBFSSOP-20C$10.20$8.95
LTC1562CG#TRPBFSSOP-20C$9.05
LTC1562CN#PBFN-16C$10.35$8.95
LTC1562IG#PBFSSOP-20I$11.75$10.30
LTC1562IG#TRPBFSSOP-20I$10.40
演示电路板
器件型号描述价格
DC266B-BLTC1562CG-2 | Very-Low-Noise, Low Distortion Quad Universal Filter$150.00
数据表
应用指南
设计要点
可靠性数据
LT Journal
CAD 符号
相关产品
LTC1562 - Very Low Noise, Low Distortion Active RC Quad Universal Filter
AN83 - Performance Verification of Low Noise, Low Dropout Regulators
DN195 - Get 100dB Stopband Attenuation with the LTC1562 Universal Filter Family
R401 Reliability Data
Feb 1998 Universal Continuous-Time Filter Challenges Discrete Designs
Feb 1999 How to Design High Order Filters with Stopband Notches Using the LTC1562 Operational Filter (Part 2)
Feb 1999 New Universal Continuous-Time Filter with Extended Frequency Range
May 1998 How to Design High Order Filters with Stopband Notches Using the LTC1562 Quad Operational Filter (Part 1)
Nov 1999 Sharp Gain Roll-Offs Using the LTC1562 Quad Operational Filter IC (Part 3)
Sep 2000 Performance Verification of Low Noise, Low Dropout Regulators
LTC1562 Footprints and Symbols