Low Voltage Disconnects 系列 - 100A - Compact LVD - Robust LVD in a Small Package

数据手册DataSheet 下载:Download 48513 LVD Datasheet

Littelfuse Compact Low Voltage Disconnects electronically sense battery voltage and conserves starting power. The unit automatically disconnects and reconnects loads based on battery conditions which prolongs battery life by preventing damage due to excessive discharge.

Small size and lightweight design means easier and more discrete mounting, to use space more efficiently, eliminate hardware, and give better routing of wires. When battery voltage falls below programmed voltage setting for 2 minutes non-critical loads are automatically disconnected. Programmable timer feature automatically disconnects loads after key off, regardless of battery condition. 

Disconnect Voltage: 12.05V min, 12.1V typical, 12.15V max. When voltage drops below 12.1V, system activates the alarm for one minute and then disconnects loads.
Overcurrent Protection: 150A - System will disconnect load and sound alarm after 5 seconds of excessive current.
Key-Off timer: 5 minutes minimum, 15 minutes typical.

特征和优势

  • Auto-ranging identifies whether system is 12V or 24V, and automatically establishes thresholds (one part number; two voltages)
  • Metric tin-plated copper terminals
  • Eliminates dead battery service calls and lost time. Extends battery life by preventing irreversible damage due to excessive discharge. 
  • Unit gives warning one minute before disconnect through a 250 mA alarm signal that can drive audible or visual systems
  • Optional manual override feature
  • Can be mounted in harsh environments – sealed to IP67, with sealed Deutsch connector (p/n 12804)
  • Solid state reliability and resistance to vibration - replaces vulnerable conventional solenoids. Unit exceeds one million cycles and is protected from over-temperature, overcurrent, overvoltage, and under-voltage.
  • Minimal draw on battery (only 1mA standby)
Ordering 订购信息
产品号Connector说明详情尺寸规格Disconnect voltage (12V)Disconnect voltage (24V)湿度Inductive transientIngress ProtectionLoad dump
48513DT06-4S Deutsch typeLVD Unit Only100 A125 A4.5W x 4.3L x 3.1H12.05 V min12.1 V typical12.15 V max24.1 V min24.2 V typical24.3 V max0 to 90% RH+/- 600 VIP67+ 150 V
48513-01DT06-4S Deutsch typeLVD with 12804 Harness100 A125 A4.5W x 4.3L x 3.1H12.05 V min12.1 V typical12.15 V max24.1 V min24.2 V typical24.3 V max0 to 90% RH+/- 600 VIP67+ 150 V
48513-02DT06-4S Deutsch typeLVD with 12804 Harness and 58326-06 Rocker Switch100 A125 A4.5W x 4.3L x 3.1H12.05 V min12.1 V typical12.15 V max24.1 V min24.2 V typical24.3 V max0 to 90% RH+/- 600 VIP67+ 150 V
48713DT06-4S Deutsch typeProgrammable LVD Unit Only100 A125 A4.5W x 4.3L x 3.1HProgrammable AttributeProgrammable Attribute0 to 90% RH+/- 600 VIP67+ 150 V
48713-01DT06-4S Deutsch typeProgrammable LVD with 12804 Harness100 A125 A4.5W x 4.3L x 3.1HProgrammable AttributeProgrammable Attribute0 to 90% RH+/- 600 VIP67+ 150 V
48713-02DT06-4S Deutsch typeProgrammable LVD with 12804 Harness and 58326-06 Rocker Switch100 A125 A4.5W x 4.3L x 3.1HProgrammable AttributeProgrammable Attribute0 to 90% RH+/- 600 VIP67+ 150 V
设计资源
Download 48513 LVD Datasheet compact-low-voltage-disconnects
Download 48513 LVD Datasheet compact-low-voltage-disconnects
48513 - Compact Low Voltage Disconnect Info Sheet compact-low-voltage-disconnects
48513 - Compact Low Voltage Disconnect Info Sheet compact-low-voltage-disconnects
48513 - Compact LVD Installation Guide compact-low-voltage-disconnects
48513 - Compact LVD 2D Print compact-low-voltage-disconnects
48713 - Programmable Compact LVD 2D Print compact-low-voltage-disconnects