• 简体中文
• English

MAX2410：低成本、RF上/下变频器，带有LNA及PA驱动器

The MAX2410 performs the RF front-end transmit/receive function in time-division-duplex (TDD) communication systems. It operates over a wide frequency range and is optimized for RF frequencies around 1.9GHz. Applications include most popular cordless and PCS standards. The MAX2410 contains a low-noise amplifier (LNA), a downconverter mixer, a local-oscillator (LO) buffer, an upconverter mixer, and a variable-gain power-amplifier (PA) driver in a low-cost, plastic surface-mount package. The LNA has a 2.4dB (typical) noise figure and a -10dBm input third-order intercept point (IP3). The downconverter mixer has a low 9.8dB noise figure and a 3.3dBm IP3. Image and LO filtering are implemented off-chip for maximum flexibility. The PA driver has 15dB of gain, which can be reduced over a 35dB (typical) range. Power consumption is only 60mW in receive mode or 90mW in transmit mode and drops to less than 0.3µW in shutdown mode. A similar part, the MAX2411A, features the same functionality as the MAX2410 but offers a differential bidirectional (transmit and receive) IF port. This allows the use of a single IF filter for transmit (TX) and receive (RX). For applications requiring a receive function only, consult the data sheet for the MAX2406, a low-cost downconverter with low-noise amplifier.

关键特性 Low-Cost Bipolar Design Integrated Upconvert/Downconvert Function Operates from Single +2.7V to +5.5V Supply 3.2dB Combined Receiver Noise Figure: 2.4dB (LNA) 9.8dB (Mixer) Flexible Power-Amplifier Driver: 18dBm Output Third-Order Intercept (OIP3) 35dB Gain Control Range LO Buffer for Low LO Drive Level Low Power Consumption: 60mW Receive 90mW Full-Power Transmit 0.3µW Shutdown Mode Flexible Power-Down Modes Compatible with MAX2510/MAX2511 IF Transceivers

MAX2410：典型工作电路 应用 DCS 1800或PCS 1900单模电话 DECT 铱星手机 ISM波段收发器 PHS/PACS PWT1900

数据手册DataSheet

关键参数

开发工具

• MAX2410EVKIT

质量和环境数据

• MAX2410.pdf

订购型号