• 简体中文
• English

DM330023-2 dsPICDEM MCHV-2 Development Board (High Voltage)

The Microchip dsPICDEM™ MCHV-2 Development System is intended to aid the user in the rapid evaluation and development of a wide variety of motor control applications using a dsPIC® Digital Signal Controller (DSC). This development system is targeted to control Brushless DC (BLDC) motors, Permanent Magnet Synchronous Motors (PMSM), and AC Induction Motors (ACIM) in sensor or sensorless operation. This flexible and cost-effective tool can be configured in different ways for use with Microchip’s specialized motor control DSCs. The dsPICDEM™ MCHV-2 Development System supports the dsPIC33F and dsPIC33E Motor Control device family and offers a mounting option to connect either a 28-pin SOIC device or a generic 100-pin Plug-In Module (PIM). The system has a three-phase power module device that contains the motor inverter and the gate driver’s circuitry. The circuit drives a BLDC, PMSM, or ACIM motor using different control techniques without requiring any additional hardware. The MCHV-2 supports using either the internal opamps found on certain dsPIC33E products or the external opamps found on the MCHV-2 board for current sensing. It also has Power Factor Correction (PFC) circuitry to meet power regulatory requirements.

The rated continuous output current from the inverter is 6.5A (RMS). This allows up to approximately 2 kVA output when running from a 208V to 230V single-phase input voltage in a maximum 30ºC (85ºF) ambient temperature environment. Therefore, the system is ideally suited for running a standard 3-Phase Induction Motor of up to 1.4 kW (1.8 HP) rating or a slightly higher rated industrial servo-motor. The power module is capable of driving other types of motors and electrical loads that do not exceed the maximum power limit and are predominantly inductive. Furthermore, single-phase loads can be driven using one or two of the inverter outputs. The unit is capable of operating from 90V up to a maximum of 265V.

The MCHV-2(DM330023-2) replaces the previous MCHV (DM330023) and is fully backwards compatible with the previous MCHV(DM330023) and all motor control PIMs.

Power Factor Correction:

• Maximum output: 1000W at 400V
• Input voltage range: 85VAC - 265VAC
• Current feedback circuitry and zero-crossing detection
• VAC input voltage sensing
• DC bus sensing and Over-current protection
• Current sensing using either internal, on chip opamps or external opamps on the MCHV-2 board

Motor Control Interfaces:

• Three-phase inverter (IPM): 400V/6.5A
• Hall sensors and Quadrature Encoder Interface (QEI)
• Phase voltage feedback for sensorless BEMF operation
• DC bus current sense resistor for single shunt resistor vector control
• Phase current sense resistors for dual shunt resistor vector control
• Over current protection

文档资料与软件下载

AppNotes	Last Updated	Size
AN1160 - Sensorless BLDC Control with Back-EMF Filtering Using a Majority Function	10/25/2012 7:20:24 AM	693KB
AN1162 - Sensorless Field Oriented Control (FOC) of an AC Induction Motor (ACIM)	7/3/2012 9:49:58 AM	766KB
AN1292 - Sensorless Field Oriented Control (FOC) for a Permanent Magnet Synchronous Motor (PMSM)Using a PLL Estimator and Field Weakening (FW)	6/30/2011 3:16:54 PM	440KB
AN1017 - Sinusoidal Control of PMSM Motors with dsPIC30F / dsPIC33F/ dsPIC33E DSC	6/27/2011 8:26:35 PM	313KB
AN1078 - Sensorless Field Oriented Control of PMSM Motors using dsPIC30F or dsPIC33F Digital Signal Controllers(Japanese)	8/17/2008 9:47:13 PM	2MB
AN1208 - Integrated Power Factor Correction (PFC) and Sensorless Field Oriented Control (FOC) System	6/17/2008 11:44:13 AM	771KB
AN1206 - Sensorless Field Oriented Control (FOC) of an AC Induction Motor (ACIM) Using Field Weakening	6/13/2008 4:04:35 PM	264KB
AN908 - Using the dsPIC30F / dsPIC33F for Vector Control of an ACIM	12/6/2007 3:28:31 PM	1MB
AN957 - Sensored BLDC Motor Control Using dsPIC30F2010	6/23/2005 9:31:19 AM	869KB
dsPICDEM? MCHV-2 Development Board User's Guide	10/3/2012 1:46:22 PM	1MB
ZD 41K25A-S ACIM Datasheet	5/5/2011 1:41:59 PM	203KB
AC300023 - AC Induction Motor Datasheet	4/1/2011 2:05:54 PM	203KB
dsPICDEM MCHV Development Board (DM330023) BOM	12/5/2010 10:05:43 PM	369KB
dsPICDEM MCHV Development System Users Guide	10/13/2009 9:56:24 PM	2MB
AN957: Sensored BLDC Motor Control Using dsPIC30F2010 Overview	8/4/2006 12:26:33 PM	55KB