NX20P5090UK：High Voltage USB PD Power Switch
The NX20P5090 is an advanced 5.0 A Uni-directional power switch for USB PD. It includes under
voltage lockout, over voltage lockout, reverse current protection and over-temperature
protection circuits, it is designed to automatically isolate the power switch terminals
when a fault condition occurs. Both VBUS and VINT pin have 29 V tolerance in shutdown
mode, two NX20P5090s can be used in parallel to support dual power inputs connecting to
same charging circuit.
The device has a default 23 V over voltage protection threshold, and the OVP threshold
can be adjusted by using external resistors on OVLO pin. A 15 ms debounce time is
deployed every time before the device is switched ON, followed by a soft start to limit
the inrush current.
Designed for operation from 2.5 V to 20.0 V, it is used in USB PD power domain isolation
applications to offer essential protection and enhance reliability.
NX20P5090 is offered in a small 15 bumps 1.6 × 2.6 mm, 0.5 mm pitch WLCSP package.
特性和优势- All time two level reverse-current protection
- 29 V tolerance on both VBUS and VINT pin
- Wide supply voltage range from 2.5 V to 20.0 V
- ISW maximum 5 A continuous current
- 30 mΩ (typical) Low ON resistance
- Default 23 V OVLO threshold and adjustable by external resistor
- Built in Slew rate control for inrush current limit
- Active Low EN pin with built-in pull down resistor
- Open-drain ACK pin for power good indication
- Protection circuitry:
- Over-Temperature Protection
- Over-Voltage Lockout
- Under-voltage Lockout
- Reverse Current Protection
- Over-Temperature Protection
- Over-Voltage Lockout
- Under-voltage Lockout
- Reverse Current Protection
- Surge protection: IEC61000-4-5 exceeds ±80 V on VBUS
- ESD protection:
- IEC61000-4-2 contact discharge exceeds 8 kV on VBUS
- HBM ANSI/ESDA/JEDEC JS-001 Class 2 exceeds 2 kV
- CDM AEC standard Q100-01 (JESD22-C101E)
- IEC61000-4-2 contact discharge exceeds 8 kV on VBUS
- HBM ANSI/ESDA/JEDEC JS-001 Class 2 exceeds 2 kV
- CDM AEC standard Q100-01 (JESD22-C101E)
- Specified from -40 °C to +85 °C
应用- Smart and feature phones
- Tablets, eBooks
| 产品图片 |
关键参数
| 型号 | Product status |
|---|
| NX20P5090UK | Development |
封装与包装
| 型号 | 封装 | Outline version | Reflow-/Wave soldering | 包装 | 产品状态 | 标示 | 可订购的器件编号, (订购码 (12NC)) |
|---|
| NX20P5090UK | () | | | | 开发中 | Standard Marking | NX20P5090UKAZ(
9353 056 97041
) |
| NX20P5090UK | () | | | | 停产 | Standard Marking | NX20P5090UKZ(
9353 056 97012
) |
停产信息
| 型号 | 订购码 (12NC) | 最后一次购买日期 | 最后一次交货日期 | 替代产品 |
|---|
| NX20P5090UK | 935305697012 | | | |
无铅环保信息
| 型号 | 可订购的器件编号 | RoHS / RHF | 无铅转换日期 | 潮湿敏感度等级 | MSL LF |
|---|
| NX20P5090UK | NX20P5090UKAZ |   | Always Pb-free | 1 | 1 |
| NX20P5090UK | NX20P5090UKZ | | Always Pb-free | 1 | 1 |
订购信息
| 型号 | 订购码 (12NC) | 可订购的器件编号 |
|---|
| NX20P5090UK | 9353 056 97041 | NX20P5090UKAZ |
