LC75878W: LCD Driver, 1/8 to 1/10 Duty
The LC75878W is 1/8 to 1/10 duty general-purpose LCD display driver used for character and graphics display. This product operates under the control of a microcontroller and can directly drive an LCD with up to 730 segments. It can also control up to 4 general-purpose output ports.
特性- 1/8duty1/4bias, 1/9duty1/4bias, and 1/10duty1/4bias drive schemes can be controlled from serial data.
- Serial data input supports CCB format communication with the system controller.
- Serial data control of the power-saving mode based backup function and all the segments forced off function.
- Direct display of display data without the use of a decoder provides high generality.
- Built-in display contrast adjustment circuit.
- Up to 4 general-purpose output ports are included.
- Independent LCD driver block power supply VLCD.
- The INH pin is provided. This pin turns off the display and forces the general-purpose output ports to the lowlevel.
- RC oscillator circuit
|
数据表 (1)
封装图纸 (1)
产品订购型号
| 产品 | 状况 | Compliance | 封装 | MSL* | 容器 | 预算价格 (1千个数量的单价） |
|---|
| LC75878W-E | Active | Pb-free | SPQFP-100 / SQFP-100 | 131AC | 4 | Tray Foam | 60 | $4.7625 |
| LC75878WS-E | Active | Pb-free | SPQFP-100 / SQFP-100 | 131AC | 4 | Tray Foam | 300 | $4.8879 |
订购产品技术参数
| Product | Segments | Key Detection | VDD Min (V) | VDD Max (V) | VLCD Min (V) | VLCD Max (V) | VI for Interface (V) | Operating Temperature (°C) | Output Ports | PWM Outputs | Character Generator | Reset | Contrast Adjustment | Control Command |
|---|
| LC75878W-E | 1/10 Duty: 730
1/8 Duty: 600
1/9 Duty: 666 | | 2.7 | 6 | 4.5 | 11 | VDD | -40 to 85 | 4 | | | | Yes | |
| LC75878WS-E | 1/10 Duty: 730
1/9 Duty: 666
1/8 Duty: 600 | | 2.7 | 6 | 4.5 | 11 | VDD | -40 to 85 | 4 | | | | Yes | |
