• 简体中文
• English

NCP1217A: PWM Controller, Fixed Frequency, Current Mode, with Duty Cycle Limited to 50%

Housed in a SOIC-7 or PDIP-7 package, the NCP1217 represents the second generation of NCP1203-based controllers. Thanks to its high drive capability, NCP1217 drives large gate-charge MOSFETs, which together with internal ramp compensation and built-in over voltage protection, ease the design of modern AC/DC adapters. NCP1217 offers a true alternative to UC384X-based designs.With an internal structure operating at different fixed frequencies (65, 100, 133kHz), the controller features a high-voltage start-up FET, which ensures a clean and loss less startup sequence. Its current-mode control topology provides an excellent input audio-susceptibility and inherent pulse-by-pulse control. Internal ramp compensation easily prevents subharmonic oscillations from taking place in continuous conduction mode designs.When the current setpoint falls below a given value, e.g. the output power demand diminishes, the IC automatically enters the so-called skip cycle mode and provides excellent efficiency at light loads. Because this occurs at a user adjustable low peak current, no acoustic noise takes place.The NCP1217 features two efficient protective circuitries: 1) in presence of an over-current condition, the output pulses are disabled and the device enters a safe burst mode, trying to re-start. Once the default has gone, the device auto-recovers. 2) if an external signal (e.g. a temperature sensor) pulls pin1 above 3.2V, output pulses are immediately stopped and the NCP1217 stays latched in this position. Reset occurs when the VCC collapses to ground, e.g. the user un-plugs the power supply.

封装

设计和开发工具 (1)

仿真模型 (2)

数据表 (1)

应用注释 (2)

封装图纸 (2)

产品订购型号

订购产品技术参数