NCP2890: Audio Power Amplifier, 1.0 W

The NCP2890 is an audio power amplifier designed for portable communication device applications such as mobile phone applications. The NCP2890 is capable of delivering 1.0 W of continuous average power to an 8 ohms load from a 5.0 V power supply, and 320 mW to a 4 ohm load from a 2.6 V power supply.The NCP2890 provides high quality audio while requiring few external components and minimal power consumption. It features a low-power consumption shutdown mode, which is achieved by driving the SHUTDOWN pin with logic low.The NCP2890 contains circuitry to prevent from "pop and click" noise that would otherwise occur during turn-on and turn-off transitions.For maximum flexibility, the NCP2890 provides an externally controlled gain (with resistors), as well as an externally controlled turn-on and turn-off times (with the bypass capacitor).Due to its excellent PSRR, it can be directly connected to the battery, saving the use of an LDO.This device is available in the 9-Pin Flip-Chip CSP and the Micro8 package.

特性
  • 1.0 W to an 8.0 Ω Load from a 5.0 V Power Supply
  • Excellent PSRR: Direct Connection to the Battery
  • Pop and Click Noise Protection Circuit
  • Ultra Low Current Shutdown Mode
  • 2.2 - 5.5 V Operation
  • External Gain Configuration Capability
  • External Turn-on and Turn-off Time Configuration Capability
  • Up to 1.0 nF Capacitive Load Driving Capability
  • Thermal Overload Protection Circuitry
应用
  • Audio Amplification
终端产品
  • Mobile Phones
封装
仿真模型 (1)
Document TitleDocument ID/SizeRevisionRevision Date
NCP2890 ORCAD TemplatesNCP2890ORCAD (17.0kB)0
数据表 (1)
Document TitleDocument ID/SizeRevisionRevision Date
Audio Power Amplifier, 1.0 WNCP2890/D (215.0kB)10
评估板文档 (4)
Document TitleDocument ID/SizeRevisionRevision Date
NCP2890GEVB Bill of Materials ROHS CompliantNCP2890GEVB_BOM_ROHS.PDF (19kB)1
NCP2890GEVB Gerber Layout Files (Zip Format)NCP2890GEVB_GERBER.ZIP (18kB)1
NCP2890GEVB SchematicNCP2890GEVB_SCHEMATIC.PDF (122kB)1
NCP2890GEVB Test ProcedureNCP2890GEVB_TEST_PROCEDURE.PDF (68kB)2
封装图纸 (2)
Document TitleDocument ID/SizeRevision
1.45X1.45X0.6MM-0.5MM PIT499E (26.7kB)A
Micro 8 lead Surface Mount846A-02 (57.7kB)J
评估板与开发工具
产品状况Compliance简短说明
NCP2890GEVBActivePb-free1 W Audio Power Amplifier Evaluation Board
产品订购型号
产品状况Compliance封装MSL*容器预算价格 (1千个数量的单价)
NCP2890AFCT2GActivePb-free Halide freeFlip-Chip-9499E1Die Surf Tape and Reel3000$0.1867
NCP2890DMR2GActivePb-free Halide freeMicro8™846A-021Tape and Reel4000$0.24
订购产品技术参数
ProductClassOutput Power Typ (W)VCC Max (V)Output Typeton Typ (ms)THD + N Typ (%)IQ Typ (mA)ISD Typ (nA)
NCP2890AFCT2GAB15.5BTL2850.021.510
NCP2890DMR2GAB15.5BTL2850.021.510
Audio Power Amplifier, 1.0 W (215.0kB) NCP2890
NCP2890 ORCAD Templates NCP2890
NCP2890GEVB BOM ROHS NCP2890GEVB
NCP2890GEVB GERBER NCP2890GEVB
NCP2890GEVB SCHEMATIC NCP2890GEVB
NCP2890GEVB TEST PROCEDURE NCP2890GEVB
1.45X1.45X0.6MM-0.5MM PIT NCP2890
Micro 8 lead Surface Mount CM1216
NCP2890