NCP81233: 4.5 V to 20 V I2C Configurable Multi-Phase Controller
The NCP81233 is a multi-phase controller capable of operating as a 1, 2, 3, 4, or 6 phase controller. The device offers an I2C interface can be used for configuring the output voltage, slew rate, overvoltage and undervoltage thresholds, and input UVLO.
The NCP81233 provides the PWM signal to interface to DrMOS and can support both 3.3V/5V logic. The device features remote sense for maintaining the voltage accuracy for high current designs. Differential current sense can be used for inductor DCR sensing or with the Iout signal from the DrMOS. The device allows Vout and Iout to be read out through the I2C interface.
The part can be interfaced to the NCP81162 phase double circuitry to allow for operation up to 12 phases.
特性- Selectable 1,2,3,4 or 6 phase operation
- Supports up to 12 phases using phase doublers
- I2C configuration
- 4.5V to 20V
- Differential current sense
- Remote differential voltage sense
- Supports 3.3V/5V PWM
- Report Iout and Vout
- Overcurrent, Overvoltage Voltage, and Thermal Protection
| 优势- Scalability allows same IC solution to be used for multiple rails
- Allow flexibility for higher current designs
- Flexibility in design
- Ideal for 12V bus designs
- Supports DCR or IMON sense
- Better output voltage accuracy
- Allows use of wide range of DrMOS solutions
- Monitoring capability
- Protects against faults
|
应用 | 终端产品- Network Switch
- Routers
- Telecom Equipment
|
数据表 (1)
封装图纸 (1)
产品订购型号
| 产品 | 状况 | Compliance | 封装 | MSL* | 容器 | 预算价格 (1千个数量的单价） |
|---|
| NCP81233MNTXG | Active | Pb-free
Halide free | QFN-52 | 485BE | 1 | Tape and Reel | 2500 | $2.0 |
订购产品技术参数
| Product | Topology | Phases | Control Mode | VCC Min (V) | VCC Max (V) | fSW Typ (kHz) | tres Typ (ns) |
|---|
| NCP81233MNTXG | Step-Down | 4/5/6 | Current/Voltage Mode | 4.5V | 20V | 200 to 1200 | |
