• 简体中文
• English

AD5317R Quad, 10-Bit nanoDAC® with 2 ppm/°C reference, SPI Interface

The AD5317R also incorporates a power-on reset circuit and a RSTSEL pin that ensures that the DAC outputs power up to zero scale or midscale and remain at that level until a valid write takes place. Each part contains a per-channel power-down feature that reduces the current consumption of the device to 4 µA at 3 V while in power-down mode. The AD5317R employs a versatile SPI interface that operates at clock rates up to 50 MHz and contains a VLOGIC pin intended for 1.8 V/3 V/5 V logic. Product Highlights Excellent DC Performance: Total Unadjusted Error:±0.1% of FSR maximum Low Drift On-Chip Reference: 2.5V, 2 ppm/°C typical temperature coefficient Two Package Options:3 mm × 3 mm, 16-lead LFCSP or 16-lead TSSOP Applications Digital gain and offset adjustment Programmable attenuators Industrial automation Data acquisition systems

The AD5317R, a member of the nanoDAC® family, is a low power, quad, 10-bit buffered voltage output DAC. The device includes a 2.5 V, 2 ppm/°C internal reference (enabled by default) and a gain select pin giving a full-scale output of 2.5 V (gain = 1) or 5 V (gain = 2). The device operates from a single 2.7 V to 5.5 V supply, is guaranteed monotonic by design, and exhibits less than 0.1% FSR gain error and 1.5 mV offset error performance. The device is available in a 3 mm × 3 mm LFCSP and a TSSOP package.

The AD5317R also incorporates a power-on reset circuit and a RSTSEL pin that ensures that the DAC outputs power up to zero scale or midscale and remain at that level until a valid write takes place. Each part contains a per-channel power-down feature that reduces the current consumption of the device to 4 µA at 3 V while in power-down mode.

The AD5317R employs a versatile SPI interface that operates at clock rates up to 50 MHz and contains a VLOGIC pin intended for 1.8 V/3 V/5 V logic.

Data Sheets

Order Information