ADG1611 1 Ω Typical On Resistance, ±5 V, +12 V, +5 V, and +3.3 V Quad SPST Switches

The ADG1611/ADG1612/ADG1613 contain four independent single-pole/single-throw (SPST) switches. The ADG1611 and ADG1612 differ only in that the digital control logic is inverted. The ADG1611 switches are turned on with Logic 0 on the appropriate control input, while Logic 1 is required for the ADG1612 switches. The ADG1613 has two switches with digital control logic similar to that of the ADG1611; the logic is inverted on the other two switches. Each switch conducts equally well in both directions when on and has an input signal range that extends to the supplies. In the off condition, signal levels up to the supplies are blocked. 1.6 Ω maximum on resistance over temperature Minimum distortion: THD + N = 0.007% 3 V logic-compatible digital inputs: VINH = 2.0 V, VINL = 0.8 V No VL logic power supply required. Ultralow power dissipation: <16 nW 16-lead TSSOP and 16-lead, 4 mm × 4 mm LFCSP

The ADG1613 exhibits break-before-make switching action for use in multiplexer applications. Inherent in the design is the low charge injection for minimum transients when switching the digital inputs.

The ultralow on resistance of these switches make them ideal solutions for data acquisition and gain switching applications where low on resistance and distortion is critical. The on resistance profile is very flat over the full analog input range, ensuring excellent linearity and low distortion when switching audio signals.

The CMOS construction ensures ultralow power dissipation, making them ideally suited for portable and battery-powered instruments.

Product Highlights
  • 1.6 Ω maximum on resistance over temperature
  • Minimum distortion: THD + N = 0.007%
  • 3 V logic-compatible digital inputs: VINH = 2.0 V, VINL = 0.8 V
  • No VL logic power supply required.
  • Ultralow power dissipation: <16 nW
  • 16-lead TSSOP and 16-lead, 4 mm × 4 mm LFCSP

Applications
  • Communication systems
  • Medical systems
  • Audio signal routing
  • Video signal routing
  • Automatic test equipment
  • Data acquisition systems
  • Battery-powered systems
  • Sample-and-hold systems
  • Relay replacements
Features and Benefits
  • 1 Ω typical on resistance
  • 0.2 Ω on resistance flatness
  • ±3.3 V to ±8 V dual-supply operation
  • 3.3 V to 16 V single-supply operation
  • No VL supply required
  • 3 V logic-compatible inputs
  • Rail-to-rail operation
  • See data sheet for additional features
Switches & Multiplexers
Reference Designs
Data Sheets
Documentnote
ADG1611/1612/1613: 1 Ω Typical On Resistance, ±5 V, +12 V, +5 V, and +3.3 V Quad SPST Switches Data Sheet (Rev. C)PDF 523 kB
User Guides
Documentnote
UG-945: Evaluation Board for 16-Lead TSSOP Devices in the Switches and Multiplexers Portfolio (Rev. 0)PDF 291.91 K
Order Information
Part NumberPackagePacking QtyTemp RangePrice 100-499Price 1000+RoHS
ADG1611BCPZ-REEL Production16 ld LFCSP (4x4mm, 2.5mm exposed pad)REEL 5000-40 to 125C01.75Y
ADG1611BCPZ-REEL7 Production16 ld LFCSP (4x4mm, 2.5mm exposed pad)REEL 1500-40 to 125C01.75Y
ADG1611BRUZ Production16 ld TSSOPOTH 96-40 to 125C2.141.75Y
ADG1611BRUZ-REEL Production16 ld TSSOPREEL 2500-40 to 125C01.75Y
ADG1611BRUZ-REEL7 Production16 ld TSSOPREEL 1000-40 to 125C01.75Y
Evaluation Boards
Part NumberDescriptionPriceRoHS
EVAL-16TSSOPEBZEvaluation Board99Y
Reference Materials
ADG1611/1612/1613: 1 Ω Typical On Resistance, ±5 V, +12 V, +5 V, and +3.3 V Quad SPST Switches Data Sheet (Rev. C) adg1611
CN0276 设计和集成文件 adg1611
UG-945: Evaluation Board for 16-Lead TSSOP Devices in the Switches and Multiplexers Portfolio (Rev. 0) adg5412bf
Switches and Multiplexers Product Selection Guide adg2128
CN-0146:利用四通道单刀单掷开关ADG1611和仪表放大器AD620构建低成本可编程增益仪表放大器电路 adg1611
CN0276:高性能、10位至16位旋变数字转换器 adg1611
CN-0146:Low Cost Programmable Gain Instrumentation Amplifier Circuit Using... adg1611