ADL5306 60 dB-RANGE (100 nA-100 µA) Low-Cost Logarithmic Converter

The ADL5306 is a low cost micro-miniature logarithmic converter optimized for the determination of optical power in fiber-optic systems. It uses an advanced implementation of a classic translinear (junction-based) technique to provide a large dynamic range in a versatile and easily-used form. A single supply voltage of between 3 V and 5.5 V is adequate; dual supplies may optionally be used. The low quiescent current (typically 5 mA) permits use in battery-operating applications

The input current IPD of 100 nA to 100 µA applied to the INPT pin is the collector current of an optimally-scaled NPN transistor, which converts this current to a voltage (its VBE) with a precise logarithmic relationship. A second such converter is used to handle the reference current, IREF, applied to pin IREF. These input nodes are biased slightly above ground (0.5 V). This is generally acceptable for photodiode applications where the anode does not need to be grounded. Similarly, this bias voltage is easily accounted for in generating IREF. The output of the logarithmic front-end is available at pin VLOG.

Features and Benefits
  • Optimized for fiber optic photodiode interfacing
  • Measures current over 3 decades
    Law conformance 0.1 dB from 100 nA to 100 µA
  • Single- or dual-supply operation (3 V to ±5.5 V total)
  • Nominal slope of 10 mV/dB (200 mV/decade)
  • Nominal intercept of 1 nA (set by external resistor)
    Optional adjustment of slope and intercept
  • Full log-ratio capabilities
  • Temperature stable
  • Rapid response time for a given current level
  • Miniature 16-lead chip scale package
    (LFCSP 3 mm × 3 mm)
  • Low power: ~5 mA quiescent current
  • Optical
    Amplifiers
    Data Sheets
    Documentnote
    ADL5306: 60dB-range (100nA to 100µA) Low-Cost Logarithmic Converter Data Sheet (Rev. 0)PDF 1015 kB
    Application Notes
    Documentnote
    AN-643: Closed-Loop Control Circuit Implementation of the ADuC832 MicroConverter®IC and the AD8305 Logarithmic Converter in a Digital Variable Optical Attenuator (Rev. 0)PDF 395 kB
    Order Information
    Part NumberPackagePacking QtyTemp RangePrice 100-499Price 1000+RoHS
    ADL5306ACP-R2 Obsolete16 ld LFCSP (3x3mm, 1.50mm exposed pad)REEL 25000N
    ADL5306ACP-REEL7 Obsolete16 ld LFCSP (3x3mm, 1.50mm exposed pad)REEL 150000N
    ADL5306ACP-WP Obsolete16 ld LFCSP (3x3mm, 1.50mm exposed pad)REEL 5000N
    ADL5306ACPZ-R2 Production16 ld LFCSP (3x3mm, 1.50mm exposed pad)REEL 250-40 to 85C05.22Y
    ADL5306ACPZ-REEL7 Production16 ld LFCSP (3x3mm, 1.50mm exposed pad)REEL 1500-40 to 85C04.75Y
    Evaluation Boards
    Part NumberDescriptionPriceRoHS
    ADL5306-EVALEvaluation Board100.19N
    Reference Materials
    ADL5306: 60dB-range (100nA to 100µA) Low-Cost Logarithmic Converter Data Sheet (Rev. 0) adl5306
    AN-643: Closed-Loop Control Circuit Implementation of the ADuC832 MicroConverter®IC and the AD8305 Logarithmic Converter in a Di aduc832
    CN-0057: Interfacing the ADL5317 High Side Current Mirror to a Translinear... ad8304
    CN-0056: Interfacing the ADL5315 High Side Current Mirror to a Translinear... ad8304
    Log Amps and Directional Couplers Enable VSWR Detection ad640
    Logarithmic Processing Applied to Network Power Monitoring ad8304
    Design a Logamp RF Pulse Detector ad640